Mô tả sản phẩm: Pin sạc dự phòng Mi Power Bank 16000mAh
| Một số lưu ý khi mua sản phẩm PIN sạc dự phòng: 1. Cell PIN và hiệu năng sử dụng: PIN sạc dự phòng có dung lượng định mức tương ứng với điện áp 3.6V (Li-ion) hoặc 3.8V (Li-Po). Khi sạc ra cho các thiết bị có điện áp 5V (hiệu điện thế tăng thì dòng điện sạc ra sẽ giảm), dung lượng sạc ra sẽ đạt khoảng 65% ~ 80% dung lượng định mức ở điện áp 3.6V hoặc 3.8V VD: iPhone 5 có dung lượng PIN là 1560mAh, 70% của PIN 2.200mAh tương đương với khoảng 1540mAh, như vậy PIN 2.200mAh có thể sạc gần đầy iPhone 5 trong điều kiện iPhone 5 không có ứng dụng chạy ngầm trong quá trình sạc 2. Mạch và dòng sạc Tất cả các PIN dự phòng chính hãng hiện nay đều có cổng sạc ra tự động đáp ứng dòng điện phù hợp với nhu cầu thiết bị. Lưu ý các thiết bị dung lượng PIN lớn sẽ cần cổng sạc ra 2A max hoặc 2.4A max. Nếu dòng ra không đủ, thời gian sạc sẽ rất lâu hoặc có thể không đầy PIN |
| Dung lượng: | 16.000mAh |
| Điện áp vào: | MicroUSB 5V === 2.4A max |
| Điện áp ra: | 02 USB 5V === 3.6A max |
| Đèn hiển thị: | Có |
| Chíp bảo vệ thiết bị: | Có |
16.000 mAhMi Power Bank
Dual USB ports and premium Li-ion battery cells encased in a sleek aluminium casing
Super-sized 16000 mAh capacity
Premium Li-ion battery cells from reputable suppliers such as LG and Panasonic, with energy densities up to 725Wh/L, add an extra 16000 mAh of battery life to your smartphone, tablet or digital camera. Supports up to 3.5 full charges on Redmi Note 4G (3100mAh).
- 3.5full charges for Redmi Note 4G
- 5full charges for iPhone 6
- 2.5full charges for iPad mini
* Lab test results. Actual usage may vary.
Plays well with othersCompatible with a wide range of devices.
Mi Power Bank automatically adjusts its output level based on the connected device. It is compatible with smartphones and tablets from Mi, Apple, Samsung, HTC, Google and BlackBerry, as well as a variety of digital cameras and handheld gaming devices.
Max 5.1V/3.6A dual output
Charge up to two devices at once. Get more output than ordinary dual-port chargers. A maximum output of 5.1V/3.6A brings you to a whole new level of high-speed charging.
- Indicator Lights
- Power Check
- Micro USB port (input)
- USB port (output)
- USB port (output)
World-class chipset protectionNine layers of circuit protection, built by Texas Instruments
Mi Power Bank's adopted USB smart-control and charging/discharging chips from Texas Instruments provide nine layers of circuit chip protection while enhancing efficiency.
-
Temperature Resistance
Heat-sensitive and temperature control mechanisms ensure Li-ion batteries operate within a safe range.
-
Short-circuit protection
The motherboard and battery are automatically protected if short circuit occurs.
-
Reset Mechanism
Reset the power bank if it stops responding by simply pressing the Power button.
-
Input Over-Voltage Protection
OVP circuit prevents voltage surges from damaging the device.
-
Automatic Charger Protection
Detects when the charger is inserted incorrectly and will automatically stop charging.
-
Protection from Output Overcurrent
Monitors output current and shuts off when current exceeds the maximum limit to protect the device.
-
Output Overvoltage Protection
Monitors output voltage and shuts off when voltage exceeds the maximum limit to protect the device.
-
Protection from Overcharge and Over-discharge
Japanese technology is used to prevent overcharging and over-discharging from damaging the Li-ion batteries.
-
PTC Protective Circuits for the Cell
Imported battery cells are equipped with PTC to effectively control and protect batteries when temperature and current exceed the maximum limit.
Optimized charging/discharging efficiencyUp to 93% conversion rate
World-class chips not only are safer, but also improve charging conversion rate and stabilize discharging voltage with advanced resistance-capacitance sensors to optimize efficiency and durability.
- Added100rounds
- Increased10 %power output efficiency
- Up to93 %conversion rate
- Minimum10000 mAhactual output
* Test conditions for output capacity: 5V/1A output, 25℃, with LG battery samples
CNC-finished edges feel better in your hand
Sleek, elegant curves along the edges of the aluminum casing are created with CNC milling technology and sandblasted to impeccable smoothness.
-
Elegant curves
Ergonomically friendly and easy to hold.
-
Anodized aluminum shell
The meticulous anodizing process creates a stronger surface resistant to fading, wear, and corrosion.
-
Naturally indented button
A slightly indented button resets the power bank with a simple touch.
Protective CasingBeautifully textured aluminum surface
Made from a single piece of aluminum, each casing is formed by high-precision CNC digital cutting. The water and corrosion-resistant surface is rigidly designed for everyday use. It has also been tested to withstand up to 2,000 pressure impacts.
- 50 kgpressure limit
- 300 timesrub test
* Product images are for illustration purposes only and may differ from the actual product
due to differences in monitor color settings and the angle at which the photo was taken.
