Cáp mạng Cat 5e, Cat6, Cat6A

VolitionTM
Category 5e cable 100 Ω, UTP
Applications Standards
- IEEE 802.3-IEEE802.5 - EN 50288-1
- FDDI - EN 50173
- ATM - ISO/IEC 11801
- RNIS - TIA/EIA 568
- IEC 61156-5
Installation Characteristics
Maximum pulling tension (N) 80
Minimum bend radius during installation (mm): 40
Minimum installed bend radius (mm) 20
Nominal weight 30 kg/km
Temperature rating (°C)
Installation 0 to +50
Operation -20 to +60
Flammability Performances
Fire retardant IEC 60332-1
Halogen free (LSOH versions) IEC 60754-1
Part of the 3M™ Volition™ Network Solutions, this 250 MHz UTP
cable is a Category 5e TIA/EIA 568 and Class D ISO 11801 and
EN 50173 approved range.
The green sheath has length marking which is easy and convenient
for the installer and gives a clear identification of cable and link
lengths.
A polyester tape between the sheath and twisted pairs allows easier
stripping.
As a 3MTM branded product, it offers 3MTM system identity for corpo-
rate and warranty approval.
Category 5e cable 100 Ω, UTP
Features
• Excellent electrical performance - tested to 250 MHz
• Length markings on the cable sheath
• Low smoke, zero halogen (LSOH) and PVC versions available
Benefits
• Good headroom over Category 5e performance
• Installer friendly
• Solutions for all levels of fire protection

Specifications
Electrical characteristics at 20º C :
Conductor resistance at 20° C (max.) 98.6 Ω /km
Dielectric strength at 50 Hz 1 kV/1min
Insulation resistance (min.) 5000 MΩ/km
Velocity (nom.) 66%
Characteristic impedance from 1 to 100 MHz 100 +/-15 Ω
Mutual capacitance (nom) <55 pF/m
Propagation delay skew 10 ns/100 m