Tại sao máy tính của tôi cài driver âm thanh rùi mà vẫn ko nghe đc nhạc??? tôi khẩn khoản noờ mọi người giúp tôi!!!
Đây là tất cả về máy tôi:
Specifications:
CPU Support: Socket 478
Intel Pentium 4 in the 478 pin package
Chipsets:
(North) VIA P4X266A
Support Pentium 4 System bus
Support PC100 / 133 SDRAM interface
Support AGP interface
Support V-Link interface to VT8233
Support ACPI 1.0b compliant power management
Support APM 1.2 compliant power management
(South) VIA VT8233
Built in high bandwidth 266MB/S 8-bit V-link Host controller
Integrated Fast Ethernet Controller with 1/10/100Mb capability
Integrated USB controller with three root hub and six function ports
Integrated dual channel UDMA 33/66/100 master mode EIDE controller
LPC interface for Low Pin Count interface to Super-I/O or ROM
Integrated Keyboard Controller with PS2 mouse support
Integrated DS12885-style Real Time Clock with extended 256 byte CMOS RAM and Day/Month Alarm for ACPI
System Management Bus Interface
Sophisticated PC99-Compatible Mobile Power Management
Integrated Plug and Play Controller
Front Side Bus
100/133 Mhz (BIOS adjustable)
400 Mhz (NetBurst)
Form Factor
ATX
Memory: 3 x 168 pin SDRAM Socket
Support PC 100/133 compliant SDRAM up to 1.5GB (un-buffered) capacity
Support PC 100/133 compliant SDRAM up to 3GB (registered) capacity
Audio: AC97 audio
AC'97 2.2 compliant CODEC on board
Expansion Slot
Support both AGP 1.5/3.3V electrical signal
Support 1X, 2X, 4X AGP data transfer
5 x PCI slots
PCI 2.2 compliant, 32-bit BUS Master Slots
133 Mbyte / sec maximum throughput
1 x CNR Riser
Support CNR riser card for Modem function
IDE: Built in VT8233
l 2 x UltraDMA/100 Bus Master IDE Channel from VT8233
ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-120 Supports
LPC I/O: ITE 8705F
Comply with Intel Low Pin Count Interface Specification Rev. 1.0
ACPI V. 1.0 compliant
Built in H/W monitor feature
Two 16C550 UARTs
* Supports two standard Serial Ports
* Supports IrDA 1.0/ASKIR protocols
* Supports Smart Card Reader protocols
Built in Smart Card Reader
IEEE 1284 Parallel Port
* Standard mode -- Bi-directional SPP compliant
* Enhanced mode -- EPP V. 1.7 and V. 1.9 compliant
* High speed mode -- ECP, IEEE 1284 compliant
Floppy Disk Controller
* Supports two 360K/ 720K/ 1.2M/ 1.44M/ 2.88M floppy disk drives
* Enhanced digital data separator
* 3-Mode drives supported
Keyboard Controller
Game Port
Dedicated MIDI Interface
Support power-failure resume and power button de-bounce
H/W Monitoring: Built in ITE 8705F
2 thermal inputs from remote thermal resistor to monitor system temperature
1 thermal inputs from thermal diode to monitor CPU temperature
8 voltage monitor inputs
1 chassis intrusion input
Monitors 3 fan tachometer inputs
Smart Guardian Controller to provide programmable fan speed automatic control
Power Management
APM 1.2 compliant
ACPI 1.0 compliant
Support multiple system suspend types- suspend to DRAM, suspend to disk, and all with hardware automatic wake-up
Bios: Award PnP BIOS
Stored in 2 Mb flash memory
SMBios 2.3
BIOS FSB setting from 100/103/107/110/133/134/137/140/142/145MHz
Support IRQ manual assign table
Bootable from Floppy, ATAPI device, USB device, SCSI device
On Board Ports / Connectors / Jumpers / Headers (front/back panel)
Ports:
Back Panel:
2 Serial Ports
1 Parallel Port (SPP, EPP, ECP)
1 PS/2 Keyboard Port
1 PS/2 Mouse Port
2 USB Ports
1x Game / MIDI Port
1x Line in, 1x Line out, 1x Mic
Connectors:
1 x ATX power connector
2 x Fan Power connectors
2 x UltraDMA/100 Bus Master IDE
1 x Floppy
Jumpers:
Clear CMOS
BIOS flash block protection
Headers:
2 sets of dual Front Panel USB header
Audio header (MIC/speaker-out)
2 x CD_in
Wake On LAN
Wake On Modem
SIR
Other Features:
Suspend switch and LED
Accessory
1 CD-ROM Disk:
VIA 4 in 1 Driver
VIA Audio driver
User manuals in PDF format
IDE Cable:
1 x ATA 100/66 cable
Floppy Cable:
1 x Floppy cable
User manual:
1 printed user manual
Other:
Chipset heat sink
Đó!!!!!
tôi cài xong rùi nó ko chạy đc//
Nó hiện lên lỗi ở windows media
mọi người giúp tôi
Nguyễn Trương Đức
Trả lời 15 năm trước
Bạn xem lại jack cắm loa/headphone của bạn.Hoặc các thiết bị loa của bạn lỗi.Ngoài ra hỏng chân cắm 3.5 cũng là vấn đề.Card sound lỗi cũng gây ra lỗi ở WM Player.Bạn nên vào device manager để xem card sound có lỗi gì ko
HDC Việt Nam
Trả lời 15 năm trước
lỗi này có thể do jac cắm lỗi, hợac bản window của bạn bị lỗi hoặc driver bạn cài cho nó không đúng.
[blue][size_4][font_4][b]Trung tâm sữa chữa máy tính HDC
Địa chỉ : Số 8 ngõ 6 Phạm Văn Đồng - Cầu Giấy - HN.
Tel : (04)37920467
Mobile : 0978352143
Mail : hoanghop.fpt@gmail.com [/b][/font_4[/size_4]]
[/blue]
Trần Viết Thường
Trả lời 15 năm trước
Máy của bạn chó 2 trường hợp bị lỗi là phần cứng ( main, loa, dây tín hiệu...) và phần mềm (Windown, Drivers..). Bạn phải chắc chắn rằng Loa của bạn còn nói đựợc không ( kiểm tra bằng cách thử sang máy khác hoặc đầu DVD, nhớ kiểm tra cả dây tín hiệu nhé, xem có bị đứt ngầm, ô xi hoá, cắm không đúng vị trí). nếu cái này ok thì bạn kiểm tra Win của bạn xem bạn nên cài lại win mới sau đó tìm đúng Driver ( theo khả nghi của mình thì cái này là chủ yếu đó có thể là bộ cài Driver ở trong ổ cứng của bạn vị virus mất hoặc lỗi File). Bạn nên dùng đĩa Driver đi kèm theo main đi. nếu bạn đã làm như trên mà chưa được thì hãy mang máy đi đến nơi có uy tín để kiểm tra nhé. chúc bạn thành công!
huynhbienthuc
Trả lời 14 năm trước
kinh nghệm em còn non kém nhưng cái vụ này em bít , anh thử vô Control Panel/Sounds and Audio Devices bật nó lên thử xem vậy là nghe được gòi ..................nếu mà không nghe dược chắc anh cài sai driver rùi [:D]
Vũ Khánh Hội
Trả lời 14 năm trước
Cái lỗi này đơn giản thôi mà , bạn làm theo trình tự của mình nhé . bạn có chắc là cài Driver đúng chưa ? nếu đúng rồi thì bạn cầm tay vào đầu Jắc loa phải có tiến ù của loa ( Volum Loa để Max ) . nếu vẫn chưa dc thì mời bạn mang đến Trung tâm Bảo hành & Sửa chữa Linh kiện máy tính HDTECH - 113 Đào Tấn - HN -------ĐT 091 355 8 355 mất khoảng 15" là xong OK ( theo mình là lỗi IC công suất Sound nằm trên main của bạn rồi )