Cáp Điều Khiển Helukabel (H)05Vv5-F ((N)Yslyö-Jz) | Chính Hãng-Giá Tốt Nhất

• SPEZIAL-PVC CONTROL CABLE WITH
  OIL RESISTANT OUTER SHEATH ADAPTED TO
  DIN VDE 0285-525-2-51 /
  DIN EN 50525-2-51 AND IEC 60227/75
  DEVIATION OF CONDUCTOR CROSS SECTIONS
• TEMPERATURE RANGE 
  FLEXING -5°C TO +70°C
  FIXED INSTALLATION -40°C TO +70°C
• NOMINAL VOLTAGE U₀/U 300/500 V
• TEST VOLTAGE 2 KV, 5 MINUTES
• BREAKDOWN VOLTAGE MIN. 4000 V
• INSULATION RESISTANCE 
  MIN. 20 MOHM X KM
• MINIMUM BENDING RADIUS 
  FLEXING 7,5X CABLE Ø
  FIXED INSTALLATION 4X CABLE Ø
• RADIATION RESISTANCE 
  UP TO 80×10⁶ CJ/KG (UP TO 80 MRAD)

• BARE COPPER CONDUCTOR, TO
  DIN VDE 0295 CL.5, FINE WIRE,
  BS 6360 CL.5, IEC 60228 CL.5
• CORE INSULATION OF SPECIAL PVC
  COMPOUND TYPE TI2 TO
  DIN VDE 0207-363-3 / DIN EN 50363-3
• CORE IDENTIFICATION TO DIN VDE 0293
  BLACK CORES WITH CONTINUOUS WHITE
  NUMBERING
• GN-YE CONDUCTOR, 3 CORES AND ABOVE
  IN THE OUTER LAYER
• CORES STRANDED IN LAYERS WITH
  OPTIMAL LAY LENGTH
• OUTER SHEATH OF SPECIAL PVC
  COMPOUND TYPE TM5 TO
  DIN VDE 0207-363-4-1/DIN EN 50363-4-1
• SHEATH COLOUR: GREY (RAL 7001)
• WITH METER MARKING

• THE MATERIALS USED DURING MANUFACTURING
  ARE CADMIUM-FREE, CONTAIN NO SILICONE
  AND ARE FREE FROM SUBSTANCES HARMFUL
  TO THE WETTING PROPERTIES OF LACQUERS

TESTS

• PVC SELF-EXTINGUISHING AND FLAME RETARDANT
  ACC. TO DIN VDE 0482-332-1-2,
  DIN EN 60332-1-2, IEC 60332-1 (EQUIVALENT
  DIN VDE 0472 PART 804 TEST METHOD B)
• OIL RESISTANT TO DIN EN 60811-404

• G = WITH GN-YE CONDUCTOR
  X = WITHOUT GN-YE CONDUCTOR (OZ)
• AWG SIZES ARE APPROXIMATE EQUIVALENT
  VALUES. THE ACTUAL CROSS SECTION IS IN MM².
• SCREENED ANALOGUE TYPE:
  (H)05VVC4V5-K