Camera | High-Speed Camera | Miro 3 | Ametek Vision Phantom Vietnam | Phantom Vietnam | Đại Lý Phantom Vietnam| Pitesco Vietnam

Liên hệ

D5 Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh






ResolutionFPS
800 x 6001,200
640 x 4801,949
512 x 5122,252
320 x 2407,155
256 x 2568,146
128 x 12825,477
128 x 6443,010
32 x 3295,238
32 x 16111,111


























Short Description

  • This rugged High-G camera is designed to go places most cameras fear to tread.
Throughput/Speed

  • Max speed at full resolution of 800 x 600 is 1200 fps to RAM
  • Max speed at reduced resolution of 32 x 16 is 111,111 fps to RAM
Sensor Specifications

  • 800 x 600 Pixels
  • 22 µm pixel size
  • 12-bit depth
  • Active sensor dimensions are 17.6 mm x 13.2 mm
  • ISO is 4800 mono, 1200 color
  • CAR in 32 x 8 pixel increments
  • Fill factor: 65%
  • Dynamic range: 60 dB
  • Read out noise at 45°C: 21e-
  • QE at 530nm: 31%
  • Full well capacity: 22000e-
Exposure

  • Minimum exposure time is 2 µs
  • Global electronic shutter
Memory

  • 2 GB or 4 GB high-speed internal RAM
  • 2 GB, 4 GB, 8 GB internal flash memory 
Record Times

  • 1.86 seconds at maximum frame rate, maximum bit depth, largest resolution and into maximum internal memory
Special Features

  • Segment memory for up to 4 cines
  • Continuous recording
  • Frame rate profile
  • Memory gate
  • Event marking
  • Frame timestamp
  • IRIG in/out (modulated and unmodulated)
  • High-G rated
  • Secondary IP address
  • Field-based firmware upgrade capable
  • Camera mounting via three 1/4-20 holes on top and bottom
  • EDR
  • Auto Exposure
Triggering

  • Programmable trigger location (pre/post trigger recording)
  • Hardware trigger
Timing & Synchronization

  • Frame synchronization to internal or external clock (FSYNC)
  • IRIG in/out (modulated or unmodulated)
  • Ready output
  • Strobe output
Signaling

  • Aux (IRIG-out or Strobe)
  • IRIG-in
  • Ready
  • F-Sync
  • NTSC & PAL video
Ethernet Connection

  • 10/100 Ethernet for both control and data
Camera Control

  • Phantom Camera
  • Control software (PCC)
  • SDK available
Video Out

  • NTSC or PAL
Lensing

  • 1" C-mount, C- to F-mount adapter for using F-mount lenses is included
Video Processing

  • Brightness
  • Gain
  • Gamma
  • Saturation
  • Hue
  • White Balance
  • Color interpolation algorith
  • Filters
  • Color matrix
  • Image flip and rotate
  • Crop
  • Scale
Data Acquisition

  • SAM-3
Motion Analysis

  • Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Compatible with 3rd party solutions
Supported File Formats

  • Cine, Cine Compressed, Cine RAW, AVI, Multipage TIFF, MXF PAL, MXF NTSC, QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX
Power

  • 15-30 VDC, 12W
  • DC Power battery Internal Lipolymer, 11.1V
Mechanical Specifications

  • 3 x 3.75 x 3 in (L, W, H)
  • 7 x 9.5 x 7 cm (L, W, H)
  • Weight: 2.5 lbs, 1.14 kg
Environmental Specifications

  • Operating Temp is 0°c to 50°c; Mil-Std-810G Method 502.5, Proc III
  • Storage temp is -50°c to 70°c; Mil-Std-810G Method 502.5, Proc I
  • Mil-Std-810G Method 501.5, Proc I
  • Humidity 95% non-condensing: Mil-Std-810G Method 507.5 Proc I, II
  • The random vibration is Functional: 0.20g^2/Hz for 1 hour in each of the three orthogonal axes;
  • Endurance: 0.83g^2/Hz for 1 hour in each of the three orthogonal axes;
  • Mil-Std-810G Method 514.6, Proc I
  • Acceleration is 6g for 1 minute on all axes;
  • Shock: 40g, 10ms all 3 axes, saw tooth
  • RTCA/DO-160E Section 7.3.3 Crash Safety Sustained
  • Acoustic (susceptibility) is 150 dBA operational, 170 dBA storage
  • Magnetic Field Immunity is 500 A/m; Mil-Std-1399-70-1
  • Finish - Black Powder Coat/Laser marked
  • ESD - 8 kV air discharge; IEC 61000-4-2
APIs

  • Phantom SDK
  • LabView
  • MatLab
Ships Standard With

  • Power supply
  • Ethernet cable
  • PCC software
  • Getting Started guide
Options

  • 12-bit depth

Bình luận

HẾT HẠN

0912 979 551
Mã số : 6536467
Địa điểm : Hồ Chí Minh
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 30/12/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn