Dimensions:

Preamplifier: 109.9 mm (h)×495.3 mm (w) × 289.17 mm (d)
Controller: 76.9 mm (h) × 495.3 mm (w) × 329.17mm (d)

Frequency Response:

10Hz - 40kHz ±0.1dB

Gain:

0, 6, 12, or 18 dB in the line stage
either 40 or 60 dB in the optional phono module

Gain Resolution:

0.1dB steps above 23.0 in display (-57dB)
1.0dB steps below 23.0 in display (-57dB)

Input Impedence:

100 kohms

Input Overload:

When gain is set to +18 dB: 2V on XLR, 1V on RCA
When gain is set to +12 dB: 4V on XLR, 2V on RCA
When gain is set to +6 dB: 8V on XLR, 4V on RCA
When gain is set to +0 dB: 16V on XLR, 8V on RCA

Mains Voltage:

100V, 120V, 220V, 230V or 240VAC at either 50 or 60Hz (set at the factory)

Maximum Output:

16V on XLR
8V on RCA

Output Impedence:

less than 10ohms on XLR
less than 20ohms on RCA

Power Consumption:

150W maximum

Preamplifier Inputs:

3 pr. balanced on XLR
5 pr. single-ended on Madrigal RCA
(optional)
2 pr. phono on either XLR or Madrigal RCA
2 Controller/DC cable connectors
1 ground terminal

Preamplifier Outputs:

2 pr. balanced main output on XLR
2 pr. single-ended main output on RCA
1 pr. record output on XLR
2 pr. record outputs on Madrigal RCA
1 3.5mm mini jack for trigger out

Residual Noise:

20Hz to 20kHz, input terminated: less than -120dB

THD + Noise:

Less than 0.001%

Volume Control Range:

80.0dB

Weight:

Controller: 27kg
Preamplifier: 21kg