Rao vặtTư vấnHỏi đápHỗ trợ
  Giỏ hàng  Đã xem  Thông báo  Đăng ký  Đăng nhập
Mua hàng thuận tiện hơn qua APP
Tải ứng dụng ngay
Sunx FX-101
  • Sunx FX-101 - Ảnh 1
Chia sẻ tới

Sunx Fx-101

Liên hệ gian hàng
    Gian hàng đang tạm ngưng phục vụ
    Tham khảo giá: Sunx FX-101
    Xuất xứ : Đang cập nhật
    * Lưu ý: Giá hiển thị trên website vatgia.com không bao gồm phí vận chuyển và các phụ phí khác. Vatgia.com chỉ đóng vai trò trung gian kết nối Người mua - Người bán. Nếu Quý khách có nhu cầu thỏa thuận về vận chuyển, thanh toán hoặc có bất cứ thông tin khiếu nại nào, vui lòng liên hệ trực tiếp với Người bán để được hỗ trợ.
    Type Standard type Long sensing range type
      Cable set   Cable set
    Model
    No.
    NPN output FX-
    101(-Z)
    (Note 4)
    FX-
    101-CC2
    FX-
    102(-Z)
    (Note 4)
    FX-
    102-CC2
    PNP output FX-
    101P (-Z)
    (Note 4)
    FX-
    101P-CC2
    FX-
    102P (-Z) (Note 4)
    FX-
    102P-
    CC2
    Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
    Power consumption Normal operation: 720 mW or less
    (Current consumption 30 mA or less at 24 V supply voltage)
    ECO mode: 600 mW or less
    (Current consumption 25 mA or less at 24 V supply voltage)
    Output <NPN output type>
    NPN open-collector transistor
    ・ Maximum sink current: 100 mA
    ・ Applied voltage: 30 V DC or less (between output and 0 V)
    ・ Residual voltage: 1.5 V or less (at 100 mA sink current)
    <PNP output type>
    PNP open-collector transistor
    ・ Maximum source current: 100 mA
    ・ Applied voltage: 30 V DC or less (between output and +V)
    ・ Residual voltage: 1.5 V or less (at 100 mA source current)
      Output
    operation
    Selectable either Light-ON or Dark-ON, at SET mode
    Short-circuit
    protection
    Incorporated
    External input <NPN output type>
    NPN non-contact input
    ・ Signal condition
    High: +8 V to +V DC or Open
    Low: 0 to +2 V DC
    (Source current 0.5 mA or less)
    ・ Input impedance: 10 kΩ approx.
    <PNP output type>
    PNP non-contact input
    ・ Signal condition
    High: +4 V to +V DC
    (Sink current 0.5 to 3 mA)
    Low: 0 to +0.6 V DC or Open
    ・ Input impedance: 10 kΩ approx.
    Response time Emission frequency
    0: 250 μs or less
    (factory default setting)
    Emission frequency
    1: 450 μs or less
    Emission frequency
    2: 500 μs or less
    Emission frequency
    3: 600 μs or less
    Emission frequency
    1: 2.5 ms or less
    (factory default setting)
    Emission frequency
    2: 2.8 ms or less
    Emission frequency
    3: 3.2 ms or less
    Emission frequency
    4: 5.0 ms or less
    Sensitivity setting 2-level teaching / Limit teaching / Full-auto teaching
    Operation indicator Orange LED (lights up when the output is ON)
    Digital display 4 digits (green) + 4 digits (red) LCD display
    Fine sensitivity
    adjustment function
    Incorporated
    Timer function ON-delay / OFF-delay timer, switchable either effective or ineffective
    [Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms]
    Attenuation function Incorporated
    Switchable either effective or ineffective
    Interference
    prevention
    function
    Incorporated Emission frequency selection method (Note 2)
    (Functions at emission frequency 1, 2 or 3)
    Incorporated Emission frequency selection method (Note 2)
    (Functions at emission frequency 1, 2, 3 or 4)
    Ambient
    temperature
    -10 to +55 ℃ +14 to +131 (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 , if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ) (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158
    Ambient
    humidity
    35 to 85 % RH, Storage: 35 to 85 % RH
    Ambient
    illuminance
    Incandescent light: 3,000 lx at the light-receiving face
    Voltage
    withstandability
    1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 3)
    Insulation
    resistance
    20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 3)
    Vibration
    resistance
    10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
    Shock
    resistance
    98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
    Emitting element
    (modulated)
    Red LED (Peak emission wavelength: 632 nm 0.025 mil)
    Material Enclosure: Polycarbonate, Key switch: Polycarbonate, Fiber lock lever: PBT
    Connecting method Connector (Note 4)
    Cable length Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
    Weight Net weight: 15 g approx.
    Gross weight: 35 g approx.
    Net weight: 15 g approx.
    Gross weight: 75 g approx.
    Net weight: 15 g approx.
    Gross weight: 35 g approx.
    Net weight: 15 g approx.
    Gross weight: 75 g approx.
    Accessory - CN-14A-C2
    (Connector attached cable, 2 m 6.562 ft long): 1pc.
    - CN-14A-C2
    (Connector attached cable, 2 m 6.562 ft long): 1pc.
    Số nhà 115, Ngõ 469 Đường Nguyễn Trãi, Phường Thanh Xuân Nam, Quận Thanh Xuân, Thành Phố Hà Nội, Việt Nam
    Xem Shop
    0248 585 4668

    Hỏi đáp về sản phẩm

    Hỏi cộng đồng(Tối thiểu 20 kí tự)
    • Tất cả
    • Thông tin sản phẩm
    • Hỏi đáp
    • Đánh giá
    Thông tin sản phẩm
    Hỏi đáp
    Đánh giá

    Thông số kỹ thuật

    Thông số kĩ thuật trên Vatgia.com chỉ mang tính tham khảo, thông số có thể thay đổi mà không báo trước.
    Nếu bạn phát hiện thông số sai xin hãy Click vào đây để thông báo cho chúng tôi. Xin trân trọng cảm ơn bạn!
    Cập nhật: 17/08/2018 - 09:01Tình trạng: Mới
    Bảo hành: 12 ThángNguồn gốc: Chính hãng
    Hãng sản xuấtSunx
    LoạiFiber Sensors
    Xuất xứĐang cập nhật
    Hỏi đáp gian hàng
    Bình luận về Sunx FX-101
    Được đánh giá tốt100%
    Xem Shop