Mô tả sản phẩm: Proface HMI GP2501-TC11
Functional Specifications
| Model | GP2501-TC11 |
||
|---|---|---|---|
| Type | TFT color LCD | ||
| Display Colors | 256 colors (no blink)/ 64 colors (3-speed blink) (software control)*1 |
||
| Backlight | CCFL (Service life: 50,000 hrs. at 24hr. operation) | ||
| Resolution | 640 × 480 pixels | ||
| Effective Display Area (mm) | 211.2(W) × 158.4(H) | ||
| Brightness Control | 4 levels of adjustment available via touch panel | ||
| Contrast Control | - | ||
| Language Character Sets | ASCII: (Code page 850) Alphanumeric (incl. European characters) Chinese: (GB2312-80 codes) simplified Chinese fonts Japanese: ANK 158, Kanji : 6962 (JIS Standards 1 & 2) Korean: (KSC5601 - 1992 codes) Hangul fonts Taiwanese: (Big 5 codes) traditional Chinese fonts |
||
| Text | 8 × 8 dots | 80 char. × 60 rows | |
| 8 × 16 dots | 80 char. × 30 rows | ||
| 16 × 16 dots | 40 char. × 30 rows | ||
| 32 × 32 dots | 20 char.× 15 rows | ||
| Character Sizes*2 | 8 × 8 dots, 8 × 16 dots, 16 × 16 dots, 32 × 32 dots | ||
| Font Sizes | Width can be expanded 1 to 8 times. Height can be expanded 1/2 *3, 1 to 8 times. |
||
| Application Memory | FLASH EPROM 2MB | ||
| Data Backup Memory | 128KB - uses lithium battery*4 | ||
| Touch Panel Resolution | 32 x 24 keys/ screen - 1 or 2 point touch | ||
| External Interfaces |
Serial Interface | Asynchronous Transmission : RS232C/RS422 Data Length: 7 or 8 bits Stop Bit: 1 or 2 bits Parity: None, Odd or Even Data Transmission Speed: 2400 to 115.2kbps, 187.5Kbps*5 |
|
| CF Card Interface | 1 Slot | ||
| AUX Input/Output Interface*6 |
Remote Reset Input |
Remote Reset Input: 1 point, Input Voltage: DC24V ±10%, Input Current: 4mA (TYP), Min. Input Pulse Width: 2ms Operating Voltage: (When ON) Min. DC21.1V/ (When OFF) Max. DC3V Isolation Method: Photocoupler Isolation |
|
| Output | Output: 3 Points (RUN Output: 1 point, System Alarm Output: 1 point, External Buzzer Output: 1 point) Rated Voltage: DC24V, Max. Rated Current: 50mA/ point, Wire Gauge: AWG28 to AWG16 |
||
| Printer Interface | Compatible with NECPC-PR201/PL, EPSON ESC/P24-J84(C), HP Laser Jet, PCL 4 command, EPSON PM/Stylus (6-color ink), EPSON Stylus (4-color ink) compatible printers*7 | ||
| Tool Connector | Asynchronous TTL level nonprocedural command I/F Used for transferring data to and from the GP application software and the GP. Used for data transfer with the 2-Port feature. Used for a variety of devices, including a bar-code reader. |
||
- Changing the "Colors" setting to "256 colors" will disable the blink feature on all your project screens. If you wish to use the blink feature, do not change this setting to "256 colors."
- The display font will differ depending on which (language) character, or which size you select.
- Only available when using "1/2 Byte Character" settings via software. (Only Japanese, Chinese, Taiwanese and Korean characters.)
- A Lithium battery's lifetime is:
10 years when the battery's ambient temperature is under 40℃
4.1 years when the battery's ambient temperature is under 50℃
1.5 years when the battery's ambient temperature is under 60℃
When used for backup:
Approximately 60 days, with a fully charged battery
Approximately 6 days, with a half-charged battery - SIEMENS SIMATIC S7-200/300/400 series (MPI port only). Please contact your Pro-face sales representative for supported models and other details.
- Using the AUX Input/Output I/F requires the separately sold Screw Lock Terminal Block (GPL-AXCN01).
- Windows drivers cannot be used. However, certain types of printers with both Windows and DOS drivers can be used. For details, contact your local Pro-face distributor.
General Specifications
| Model | GP2501-TC11 |
||
|---|---|---|---|
| Electrical | Rated Voltage | AC100V - 240V | |
| Rated Voltage Range | AC85 - 265V | ||
| Power Consumption | 50VA or less (ACIN 100V) 85VA or less (ACIN 240V) |
||
| Allowable Voltage Drop | 1 cycle or less (Actual drop must be less than 1 second) |
||
| Voltage Endurance | AC1500V, 20mA for up to 1 minute (between charging and FG terminals) |
||
| Insulation Resistance | 10MΩ or higher at DC500V (between charging and FG terminals) |
||
| Environmental | Ambient Operating Temperature*1 | 0 - 50℃ | |
| Storage Temperature | -20 - 60℃ | ||
| Ambient Humidity | 10 - 90% RH (non-condensing wetbulb temperature 39℃ or less) |
||
| Storage Humidity | 10 - 90% RH (non-condensing wetbulb temperature 39℃ or less) |
||
| Vibration Resistance | Compatible with IEC61131-2 (JIS B 3502) Compliant When vibration is NOT continuous: 10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s2 When vibration is continuous: 10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s2 X, Y, Z directions for 10 times (80min.) |
||
| Noise Immunity | Noise Voltage: 1500Vp-p Pulse Duration: 1µs Rise Time: 1ns (via noise simulator) |
||
| Electrostatic Discharge Immunity | 6kV (complies with IEC 61000-4-2 Level 3) | ||
| Corrosive Gases | Free of corrosive gasses | ||
| Structural | Grounding | 100Ω or less, or your country's applicable standard | |
| Ratings | Equivalent to IP65f (JEM1030), NEMA#250 TYPE 4X/12*2 | ||
| External Dimensions (mm) | 317W × 243H × 58D | ||
| Weight | 3.5kg (7.7lb) or less | ||
| Cooling Method | Natural air circulation | ||
- When installing the GP in a cabinet or enclosure, the term “ambient operation temperature” indicates the cabinet or enclosure’s internal temperature. The LCD displays may occasionally blur when they are used for hours at over 40℃ ambient operating temperature. This is a temporary phenomenon. After the temperature returns to normal, the display will be restored to normal. The GP's operation will not be affected even though the display is blurred.
- The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation.
