Ac Servo Drive Mitsubishi Mr-J4W2-1010B

Liên hệ

Hồ Chí Minh


Qúy khách hàng vui lòng liên hệ để được hỗ trợ nhanh nhất:

-          Công ty TNHH Thiết Bị Điện Mỹ Kim

-          Mỹ Mỹ: 0943 134 668

-          Email: sale.mykim@gmail.com

-          Skype: 0943 134 668

 

Series name
Command interface
Voltage class
capacity[kW]
Servo amplifier model name
outputRated voltage
Rated current (each axis)[A]
Main circuit power inputVoltage / frequency
Rated current[A]
Allowable voltage fluctuation
Allowable frequency fluctuation
Control circuit power inputVoltage / frequency
Rated current[A]
Allowable voltage fluctuation
Allowable frequency fluctuation
power consumption[W]
Power supply for interface
control method
Capacitor regenerationReusable regenerative energy[J]
Allowable charging equivalent inertia moment J[× 10 -4 kg • m 2 ]
Allowable charging equivalent mass [kg]LM-H3
LM-K2
LM-U2
Allowable regenerative power of regenerative resistor with built-in servo amplifier[W]
Dynamic brake
SSCNETⅢ / H command communication cycle
Communication function
Encoder output pulse
Analog monitor
Fully closed control
Load-side encoder interface
Servo function
Protection function
Functional safety
Safety performanceThird-party certification standards
Response performance
Test pulse input (STO)
Estimated mean dangerous failure time (MTTFd)
Diagnostic range (DC)
Mean probability of dangerous failure (PFH)
Overseas standards
Structure (degree of protection)
Close mounting
Environmental conditionAmbient temperature
Ambient humidity
atmosphere
elevation
Vibration resistance
mass[kg]
About restrictions



MELSERVO-J4 series

2-axis integrated SSCNETⅢ / H interface

200V

1


Three-phase 170 V AC

6.0

Three-phase 200 VAC to 240 VAC, 50 Hz / 60 Hz

9.8

Three-phase 170 V to 264 V AC

Within ± 5%

Single-phase 200 VAC to 240 VAC, 50 Hz / 60 Hz

0.4

Single-phase 170 V AC to 264 V AC

Within ± 5%

55

24 VDC ± 10% (required current capacity: 0.35 A (including CN8 connector signal))

Sine wave PWM control / current control method

44

8.92

9.8

22.0

100

Built-in

0.222 ms, 0.444 ms, 0.888 ms

USB: Connection with a personal computer (MR Configurator2 compatible)

Supported (AB phase pulse)

None

Correspondence

Mitsubishi Electric high-speed serial communication

Advanced vibration suppression control Ⅱ, adaptive filter Ⅱ, robust filter, auto tuning, one-touch adjustment, tough drive function, drive recorder function, pushing control, machine diagnosis function, power monitor function, scale measurement function, J3 compatible mode

Overcurrent cutoff, regenerative overvoltage cutoff, overload cutoff (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, excessive error protection, magnetic pole detection protection, linear Servo control error protection

STO (IEC / EN 61800-5-2)

EN ISO 13849-1 Category 3 PL e, IEC 61508 SIL 3, EN 62061 SIL CL 3, EN 61800-5-2

8 ms or less (STO input off → energy cutoff)

Test pulse interval: 1 Hz to 25 Hz Test pulse off time: 1 ms max.

MTTFd ≧ 100 [year] (314a)

DC = Medium, 97.6 [%]

PFH = 6.4 × 10 -9 [1 / h]

For information on compliance with overseas standards and laws, please refer to the conforming product page .

Strong cold, open (IP20)

Yes

Operating: 0 ° C to 55 ° C (no freezing), storage: -20 ° C to 65 ° C (no freezing)

Operation / storage: 5% RH to 90% RH (no condensation)

Indoors (no direct sunlight), no corrosive gas, flammable gas, oil mist, dust

2000 m or less above sea level

5.9 m / s 2 , 10 Hz to 55 Hz (X, Y, Z directions)

2.0

Restrictions are not displayed when comparing specifications, so refer to the specifications of each model.

Bình luận

HẾT HẠN

0908 929 512
Mã số : 15944398
Địa điểm : Toàn quốc
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 01/05/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn