Motorized Test Stand Model Esm- Mark-10_Stc Việt Nam

Xin gửi đến quý khách thông tin của sản phẩm sau:

• Maximum force: 200 lb [1kN]
• Maximum travel: 13" [330 mm]
• Speed range: 0.5-13 in/min [13-330 mm/min]
• Speed accuracy: �5% of setting, �0% variation with load
• Remote control console with a 3'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' [1 M] cable
• Universal power supply: 80-250 VAC
• Manual travel knob
• Mounting holes for bench mounting
• Removable base plate with 25 #10-32 threaded holes for fixture mounting
• Base may be removed for alternative mounting
• CE mark

	A wide range of force gauges and gripping fixtures Digital travel displays >> 6" [150 mm] and 12" [300 mm] travel models available, 0.0005" [0.01 mm] resolution, 0.001" [0.03 mm] accuracy, SPC output for automated data collection Limit switch kit << Set of upper and lower adjustable solid state limit switches. Repeatable to within 0.001" [0.03 mm]. << Eye End Adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges
Set point / overload protection cable Stops test stand travel at programmable high and low set points for tension and compression forces. Also protects the force gauge against accidental overloads during motorized tests. Compatible with Series 5 and Series 4 force gauges. Can be used simultaneously with the USB data output cable supplied with the gauge. Column extensions >> A spacer is supplied between the base and the column, increasing clearance between the force gauge and base (does not increase travel distance). Available in 6", 12", and 24", and custom lengths. Custom speed ranges Speeds can be modified to as slow as 0.02 in/min [0.5 mm/min] or as fast as 45 in/min [1143 mm/min]. Note that in some cases, the maximum force will be affected. Contact Mark-10 for complete details. Competitor force gauge mounting kits available

Mark-10 force gauges with data output include a USB cable, which can be connected directly to a PC.

If the ESM001 digital travel display option is ordered and connection to a PC is desired, the following connection cables are required:

Travel display (Mitutoyo) <=> 09-1066 cable, Mitutoyo <=> MRS100A converter, Mitutoyo to RS-232 <=> RSU100 converter, RS-232 to USB (optional)

Ordering information for these accessories can be found here.

****************************

Lâm Hoài Diễm

[Cellphone]: 0916 635 755

[Email]: diem@songthanhcong.com

Head office: 110 Hoa Cuc Street, Ward 7, Phu Nhuan District, HCMC 

TI + 84 8 35074676              FI +84 8 35173889 

WI www.stc-vietnam.com