Thiết Bị Không Dây Bolt - Ethernet Rj45 Poe, Anybus Wireless Bolt - Ethernet Rj45 Poe

CONFIGURE MACHINES WIRELESSLY

AN ALL-IN-ONE SOLUTION

With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an exterior IP67 protection class.

Features and benefits

• Configure or troubleshoot industrial machinery over a wireless network
• Increase flexibility and mobility. Eliminate expensive fixed HMI’s by using a laptop, tablet or smartphone

• Connect to moving field equipment such as AGV’s (Automated Guided Veicles)
• Fast Roaming (IEEE 802.11r), High link speed (IEEE 802.11n)
• Full compatibility with Anybus Wireless Bridge — a wireless product for cable replacement
• Connect to a Cloud Service of your choice or get live data and integrate it into a SCADA system

• Supports Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET, TCP/UDP
• Simultaneous operation of Bluetooth and Wireless LAN allowing for bridging between the two networks
• Security features for a secure industrial operation
• Dual power supply, PoE (Power over Ethernet) and/or 3-pole 19-36VDC connector  
• Available with white top Sunbolt enabling 30% higher surrounding temperature compared to black in direct sunlight.
• Operation with Wirelesss LAN, Bluetooth classic and Bluetooth Low Energy.
• 
  

  Wireless LAN Interface

  • Wireless standards: WLAN 802.11 a, b, g, n, d.
  • Operation modes: Access point or Client
  • Wireless LAN bands: 2.4GHz and 5GHz
  • RF output power: 18 dBm EIRP (including antenna gain 3dBi)
  • Max number of slaves for access point: 7
  • Power consumption: 54mA@24VDC
  • Net data throughput: 20 Mbps. Link speed: max 65 Mbps (802.11n SISO)
  • Security: WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP including MS-CHAP.
• 
  

  Bluetooth Interface

  • Wireless standards (profiles): PANU & NAP
  • Operation modes: Access point or Client
  • RF output power: 14 dBm EIRP (including antenna gain 3dBi)
  • Bluetooth conducted sensitivity: -90 dBm
  • Max number of slaves for access point: 7
  • Power consumption: 36 mA@24VDC
  • Net data throughput: ~1 Mbps
  • Bluetooth version support: Classic Bluetooth v2.1
  • Security: Authentication & Authorization, Encryption & Data Protection,
  • Privacy & Confidentiality, NIST Compliant, FIPS Approved
• 
  

  Bluetooth Low Energy Interface

  • Wireless standards (profiles): GATT
  • Operation modes: Central or Peripheral (pending)
  • RF output power: 10 dBm EIRP (including antenna gain 3dBi)
  • Max number of simultaneous connections for Central:7
  • Power consumption: 36 mA@24VDC
  • Net data throughput: ~200 kbps
  • Bluetooth Low Energy version: 4.0 dual-mode
  • Security: AES-CCM cryptography
• 
  

  Ethernet Interface

  • Supports Ethernet protocols: IP, TCP, UDP, HTTP, LLDP, ARP, DHCP Client/Server, DNS support
  • Supports wireless bridging of Industrial Ethernet protocols: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET
  • Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over
  • Layer 2 bridging mode between Anybus Wireless Bolts or Bridges, Otherwise Layer 3 TCP/UDP bridging
• 
  

  Technical specifications

   

  • 
    

    Dimensions	Diameter: 68 mm. Height: 75 mm (95 mm including connector. Outside height: 41 mm)
    Weight	81g
    Temperature Bolt (black)	Shadow:  -40 to +65 °C Direct sunlight:  -40 to +45 °C Storage temperature: -40 to +85 °C
    Temperature Sunbolt (white)	Shadow and direct sunlight: -40 to +65 °C Storage temperature: -40 to +85 °C
    Output Power	Wireless LAN 18 dBm EIRP  - Bluetooth 14 dBm EIRP - Bluetooth Low Energy 10 dBm EIRP All including antenna gain 3dBi
    Power supply	9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
    Power consumption	0.7W idle, 1.7W max (54mA@24VDC with Wireless LAN and 36mA@24VDC with Bluetooth)
    Enclosure material	Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 476C. Bottom: Celanex: XFR 6840 GF15. PBT glass reinforced plastic.
    Mechanical rating	IP67 for top (outside the host), IP21 for bottom (inside the host)
    Mounting	M50 screw and nut (50.5 mm hole needed)
    Max Range	100 meters
    Antenna	One built in antenna
    Connector	Included plug connector (2x9p; 3.5mm, Phoenix DFMC 1.5/9-ST-3.5, push-in spring connection)
    Vibration compatibility	Sinosodial vibration test according to IEC 60068-2-6:2007 and with extra severities; Number of axes: 3 mutually perpendicular (X:Y:Z), Duration: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operation, Frequency: 5-500 Hz, Displacement ±3.5 mm, Acceleration: 2g. Shock test according to IEC 60068-2-27:2008 and with extra severities; Wave shape: half sine, Number of shocks: ±3 in each axes, Mode: In operation, Axes ± X,Y,Z, Acceleration: 30 m/s2 , Duration: 11 ms.
    CERTIFICATIONS
    Europe	ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. CE, 2014/53/EU Radio Equipment Directive (RED)
    USA	FCC 47 CFR part 15, subpart B. UL: Ind. Cont. Eq. also Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D, T4. UL file: E203225
    Canada	ICES-003
    Japan	MIC
    Other countries	Brazil, Australia, Colombia, Turkey, Malaysia, Argentina Pending: India, Chile

  • Availability
  • Anybus Wireless Bolt Ethernet. Bluetooth access point or client. Wireless LAN 2.4/5 GHz access point or client.
  • AWB2000 Black top, 18-pole push spring connector
  • AWB2001 “Sunbolt” White top 18-pole push spring connector AWB2030 Black top, RJ45 connector and PoE (Power over Ethernet)
  • AWB2031 “Sunbolt” White top RJ45 connector and PoE (Power over Ethernet)
  • Accessories
  • 024703 Bolt cable kit. Bolt connector with Ethernet cable (RJ45 male) and power supply (World) with cable. Both cables are 150cm. (for AWB2000/ AWB2001 only)
  • 024704 Adapter cable, Bolt 18-pin to female Ethernet RJ45 , 20cm. (for AWB2000/ AWB2001 only)
  • AWB4005 PoE Injector, 100-240VAC
  • AWB4006 PoE Injector, 12-57VDC
  • Mounting
  • The Anybus Wireless Bolt is mounted into a 50.5 mm (M50) hole in the host device. The top (“helmet”) goes on the outside and provides an IP67 exterior. The bottom is located inside the machine or cabinet (IP21)
  • 
  • Bolt Cable Kit
  • Bolt connector with Ethernet cable (RJ45 male) and power supply (World) with cable. Both cables are 150cm. Order code: 024703 (AWB2000 only)
  • 
  • Order a Starter Kit
  • Bolt 18-pin: 2 x Wireless Bolts 18-pin (AWB2000), 2 x Power Supply (world), cabling, Quick Start Guide. Order code: AWB2300 Bolt RJ45: 2 x Wireless Bolts RJ45 (AWB2030), 2 x Power Supply (world), power cables, Quick Start Guide. Order code: AWB2330
  •