Module Giao Tiếp Anybus Communicator - Interbus, Anybus Communicator - Interbus

CONVERT ALMOST ANY TYPE OF SERIAL PROTOCOL

The Communicator is capable of converting almost any type of serial protocol such as Modbus RTU, ASCII, DF1 or any other type of proprietary Request/Response or Produce/Consume protocol.

Integrate your serial RS-232/422/485 based industrial devices and equipment to a Interbus control system without the need for any changes to the device. Just connect, configure and you're done!

The Anybus® Communicator™ is a proven and trusted protocol converter gateway that connects non-networked industrial devices and equipment to Interbus. The gateway performs an intelligent protocol conversion and presents the serial data to the Master PLC/Controller as easily processed I/O data.

The Communicator is slim stand-alone gateway designed for IP20 and DIN-rail mounting, requiring a 24-volt power supply. The Communicator is conformance tested to current Interbus specifications guaranteeing network compatibility.

Features and benefits

• Saves machine builders and device manufacturers of integrating a Interbus interface
• Requires no hardware or software changes to be made to the connected device
• Compatible with all PLCs with Interbus support
• Performs complete serial protocol conversion, no PLC function blocks required
• Intelligent I/O data mapping within the Communicator permits even devices with slow serial communication can be integrated without any restrictions to the upper network  
• Possibility to connect upto 31 nodes via one Communicator giving inexpensive Interbus network connectivity for your devices 
• Always free technical support from HMS and our global Anybus Distributors
• 
  

  Serial protocol configuration features

  No high level programming skills are needed to set up the Anybus® Communicator as configuration is accomplished using the included, easy to use Windows™ based ACM (Anybus Configuration Manager).

  • Selectable RS-232/422/485 interface
  • Pre-defined 6-step Modbus-RTU configuration wizard
  • Selectable pre-loaded DF1 commands. No scripting or serial frame building required!
  • Ability to configure ASCII or vendor specific protocols (Request/Response or Produce/Consume via a visual frame building interface 
  • Multi-language support for English, German, Spanish, Italian, French, Polish, Russian, Chinese and Japanese
  • Handy Save/Load function allows for a completed configuration to be re-used for many other installations
  • Password protection prevents unauthorized upload and download of configurations
  • Serial Line Listener and In-built Checksum calculations for diagnostic and troubleshooting
• 
  

  Interbus interface features

  • Complete Interbus functionality according to EN 50170
  • Max. 20 bytes of process data (512 bytes with PCP) in each direction
  • PCP V.2.0. (0, 1, 2, or 4 words)
  • Interbus baudrate 500 kbit/s – 2 Mbit/s
  • Automatic slave address detection by controlling PLC master
  • 1x D-sub 9-pin male and 1x D-sub 9-pin female network connector
• 
  

  Technical specifications

• 
  

  Dimensions  (L•W•H)	120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
  Weight	150g or 0,33 lbs
  Operating temperature	0 to +55 °C  or  0 to +131 °F
  Storage temperature	-40 to +85 °C  or  -40 to +185 °F
  Power supply	24 VDC
  Current consumption	max. 300mA (Typical 100 mA)
  Serial application Interface	Selectable RS-232, RS-422, RS-485
  Max stations	31 nodes via RS-422 or RS-485
  Galvanic isolation	On both serial and BUS/Ethernet side
  Mechanical rating	IP20, NEMA rating 1
  Mounting	DIN-rail (EN 50022 standard)
  Protocol: Modbus RTU	Modbus RTU Master - Request/Response
  Protocol: ASCII/Vendor Specific	Request/Response or Produce/Consume
  Protocol: Rockwell DF1	DF1 Master
  Certifications	CE, CULUS, RoHS

• 
  

  Ordering Information

  

  ORDER CODE: AB7012
  
  INCLUDED COMPONENTS:
  - Quick start documentation
  - Configuration cable (RS-232)
  - D-sub connector with screw terminals for serial sub-network
  - Configuration software available for download
  - (Power supply not included)
  
  OPTIONAL ACCESSORIES:
  -  USB-RS-232 configuration adapter (Order Code: 019570)

Liên hệ: Mr Hải

Sdt: 0398991575

Gmail: hai@ansgroup.asia