Thiết Bị Gateway Anybus Ab7694-F, Ab7694-F Anybus X-Gateway – Cc-Link Slave - Ethercat Slave

Features and benefits

• Fast copying of cyclic I/O data between the two CC-Link networks (10-15 ms)
• Proven and tested with all PLC manufacturers
• Supports up to a maximum of 512 bytes of Input and Output data in each direction
• Optional control and status information added to the I/O data for diagnostic purposes
• Robust stand-alone housing for use in harsh industrial environments
• Global free technical support and consultancy
• 
  

  CC-Link Slave interface

  CC-Link Slave settings can be made either via on-board switches, or by importing the provided .CSP file into engineering tool of the controlling PLC.

  • Complete CC-Link slave Version 1 and 2 functionality
  • CC-Link Conformance BAP-05027-B specification
  • Transparent CC-Link communication (Standard Mode)
  • PLC Profile compliant communication (PLC profile mode)
  • Max. 896 bits/128 words (368 bytes) of I/O data in each direction
  • Supports CC-Link baudrates 156 kbit/s – 10 Mbit/s
  • Up to 4 occupied stations
  • Up to 8 extension cycles (version 2 only)
  • CC-Link configuration via on-board switches or via .CSP file
  • 1x 5-pin, 5.08 Phoenix plug network connector
  • 
    

    EtherCAT Slave interface

    EtherCAT Slave settings can be made by importing the provided .XML file into engineering tool of the controlling PLC.

    • Complete EtherCAT slave according to DS 301 V4.022
    • Supports CANopen over EtherCAT
    • Max 512 bytes of Input and 512 bytes of Output data (PDO + SDO)
    • Baudrate 100 Mbit/s full duplex
    • 4 FMMU channels (can be used freely by the EtherCAT master for any purpose.)
    • 4 SM channels
    • Bit-oriented FMMU operation
    • Position addressing, node addressing and logical addressing
    • PDI Watchdog
    • Output I/O Sync Manager Watchdog
    • Integrated switch allowing for a daisy-chain topology
    • 2x RJ45 EtherCAT connectors
    • 
      

      Technical specifications

      Dimensions (L•W•H)	114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
      Weight	400g or 0,880 lbs
      Operating temperature	-25 to +65 °C  or  -13 to +149 °F
      Storage temperature	-40 to +85 °C  or  -40 to +185 °F
      Power supply	24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
      Current consumption	max. 400mA (Typical 200mA)
      Enclosure material	Aluminium and plastic
      Installation position	Vertical / Flat*
      Galvanic isolation	YES, on both BUS/Ethernet side
      Mechanical rating	IP20, NEMA rating 1
      Mounting	DIN-rail (EN 50022 standard)
      I/O configuration	via USB port with Anybus Configuration Manager software
      Certifications	CE, CULUS, RoHS