Đèn Led Khẩn Cấp Prxb/05L/L E/Em/Bp/3H Chalmit

ATEX Classification

Group II Category 2 GD

Application

Zone 1 and 21 areas to EN 60079-10-1 and EN 60079-10-2

Certificate

• 
  

  EU Type Examination Certificate: CML18ATEX3358X

• 
  

  IECEx Certificate of Conformity: IECEx CML 18.0167X

Coding

Ex db eb mb op is IIC T4 Gb, Ex mb op is tb IIIC T85°C Db IP6X.

Enclosure

Marine grade aluminium body with polycarbonate diffuser. Driver enclosure with epoxy powder finish (RAL 9005)

Geartray

Aluminium

Entry

4 x M20 cable entries - 2 at each end [3 cable entries on Emergency with battery stick]

Termination

3 core 4mm² max conductor [4 core on Emergency] with looping one end and 16A rating through wiring

Installation

2 x M8 mounting points located on the rear of the body

Control Gear

Electronic Driver

Colour Temperature (CCT)

5000K (Cool White)

Colour Rendering Index (Ra)

>70

Maintenance)

Front access panel with Torx screws

LED Lifetime @ 60°C Ambient

L70 > 200,000hrs

Maintenance Free Lifetime @ Ambient

120,000hrs @ 25°C; 90,000hrs @ 60°C

Battery

Swappable Ni-MH (6V) battery stick [Emergency version only]

Emergency Duration

90 mins (25% output)

Ingress Protection

IP66/67 to EN 60529

Surge Protection

4kV

Electrical Supply

• 
  

  110-277V AC, 50/60Hz

• 
  

  127-250V DC

PRXB/02L/LE

2600 lm

16W

T4

85

-40 to +60

7.1kg

PRXB/05L/LE

5200 lm

36W

T4

85

-40 to +60

9.1kg

PRXB/02L/LE/EM

2600 lm

18.5W

T4

85

-25 to +60

7.6kg

PRXB/05L/LE/EM

5200 lm

38.5W

T4

85

-25 to +60

9.6kg

/M25

M25 cable entries

/3H

3 hour battery duration (12.5% output)

/LBE

Looping both sides [Non Emergency only]

/4K

4000K (Neutral White) LED Strips

/EL

Extra live termination facility
((to match emergency circuit)

/SC

Screwed connection terminal block(up to 6mm² conductors)

/EMI

Internal battery pack [replace /EM with /EMI]

/BNI

atteries not included [Emergency version only

/NST

Non Self Test [Emergency version only]

/DM

DALI Dimmable driver

/ASL

Asymmetric along Length

/M

Medium Beam

/ASW

Asymmetric along Width [05L version only

/BP

Zinc plated brass plugs

Pole mounting bracket assembly (38-42mm diameter poles)

SPOL4-100001

Pole mounting bracket assembly (48-52mm diameter poles)

SPOL4-100002

Pole mounting bracket assembly (58-62mm diameter poles)

SPOL4-100003

Hook type ceiling bracket assembly

SPRO4-0005

Flush mounted wall bracket assembly

SPRO4-0006

Ceiling bracket assembly

SPRO4-0002

Standard wall mounting outreach bracket (use with SPOL4-100001)

NPRO4-0008

Eyebolt mounting assembly

SPRO5-0005

PRXB/02L/L E/BP

Lumin ind, led linear luminaire, hazardous area, led,

Power Consumption 16W

Industrial Luminaires ; Type : Led Linear Luminaire ; Application : Hazardous Area ; Ingress Protection : IP66/IP67 ; Classification, Hazard Areas : Zone 1; En/Iec 60079 ; Type, Lamp : Led ; Lampholder Mounting : Pipe Clamp ; Cable Entry : M20 ; Lamp Changing : Led, MIN 200,000 HOURS, B50/L70 (IESNA LM-80); POWER RATE: 16W; VOLTAGE INPUT: 230VAC, 50HZ; EXPLOSION PROTECTION: II2 G IIC T4 GB: EX DB, EX EB, EX MB, EX DE OR EX E (OR EQUIVALENT WHICH IS SUITABLE FOR ZONE 1 APPLICATION); 2696 LM: RA=70; 5000K-7000K; 7.1KG; IK10 (IEC 62262); SURGE PROTECTION 4KV; AMBIENT TEMPERATURE: 0 TO 45 DEGREE C; DRILLED HOLES: 3XM20; CABLE ENTRY M20; THROUGH WIRING 3X2.5M2; INSTALLED TERMINAL STRIP: PE + N + L1 + L2 + L3; 5-YEARS WARRANTY; ACCESSORIES INCLUDED; PIPE CLAMP FITTED IN MOUNTING RAIL, 01 PAIR BOLTS & NUTS, MATERIAL: STAINLESS STEEL SS316, MOUNTING ON PIPE 42MM DIAMETER; 01 STOPPING PLUG; 01 EX CABLE GLAND (METAL): M20X1.5, EX D/ EX E IIC IP66, SHROUD, LOCKNUT, SERRATED WASHER, ENTRY THREAD SEAL, NOTE: CABLE GLAND MUST BE SUITABLE TO INSTALL FOR THE LUMINAIRE; IF CABLE ENTRY M25, THEN 01 EX CABLE GLAND (METAL) M25X1.5 IS REQUIRED; MANDATORY DOCUMENTS TO BE PROVIDED TOGETHER WITH THE PROPOSAL: 1. SAMPLE TESTING CERTIFICATE OF THIRD PARTY INCLUDING: WATTAGE, LUMENS, INGRESS PROTECTION IP66, COLOUR TEPERATURE CCT, CRI, IK08:

2. CO/CQ FOR LINEAR LUMINAIRE; 3. IECEX CERTIFICATE OF CONFORMITY; AT LEAST ONE TESTING CERTIFICATE FOR EACH TYPE OF LIGHTING FIXTURE

Chalmit

/UK

PRXB/05L/L E/BP

LUMIN IND, LED LINEAR LUMINAIRE, HAZARDOUS AREA, LED MOUNTING ON PIPE 42MM DIAMETER, POWER CONSUMPTION 35W INDUSTRIAL LUMINAIRES ; TYPE : LED LINEAR LUMINAIRE ; APPLICATION : HAZARDOUS AREA ; INGRESS PROTECTION : IP66/IP67 ; CLASSIFICATION, HAZARD AREAS : ZONE 1; EN/IEC 60079 ; TYPE, LAMP : LED ; LAMPHOLDER : MOUNTING ON PIPE 42MM DIAMETER; MOUNTING: PIPE CLAMP ; CABLE ENTRY : M20 ; LAMP CHANGING : MIN 200,000 HOURS, B50/L70 (IESNA LM-80); POWER RATE: 35W: VOLTAGE INPUT: 230VAC, 50HZ; EXPLOSION PROTECTION: II 2 G IIC T4 GB: EX DB, EX EB, EX MB, EX DE OR EX E (OR EQUIVALENT WHICH IS SUITABLE FOR ZONE 1 APPLICATION); MINIMUM 5600LM: RA=70; 5000K-7000K; 9.1KG; IK10 (IEC 62262); SURGE PROTECTION 4KV; AMBIENT TEMPERATURE: 0 TO 45 DEGREE C; DRILLED HOLES: 3XM20; CABLE ENTRY M20; THROUGH WIRING 3X2.5M2; INSTALLED TERMINAL STRIP: PE + N + L1 + L2 + L3; 5-YEARS WARRANTY; ACCESSORIES INCLUDED; PIPE CLAMP FITTED IN MOUNTING RAIL, 01 PAIR BOLTS & NUTS, MATERIAL: STAINLESS STEEL SS316, MOUNTING ON PIPE 42MM DIAMETER; 01 STOPPING PLUG; 01 EX CABLE GLAND (METAL): M20X1.5, EX D/ EX E IIC IP66, SHROUD, LOCKNUT, SERRATED WASHER, ENTRY THREAD SEAL, NOTE: CABLE GLAND MUST BE SUITABLE TO INSTALL FOR THE LUMINAIRE; IF CABLE ENTRY M25, THEN 01 EX CABLE GLAND (METAL) M25X1.5 IS REQUIRED; MANDATORY DOCUMENTS TO BE PROVIDED TOGETHER WITH THE PROPOSAL: 1. SAMPLE TESTING CERTIFICATE OF THIRD PARTY INCLUDING: WATTAGE, LUMENS, INGRESS PROTECTION IP66, COLOUR TEPERATURE CCT, CRI, IK08:

2. CO/CQ FOR LINEAR LUMINAIRE; 3. IECEX CERTIFICATE OF CONFORMITY; AT LEAST ONE TESTING CERTIFICATE FOR EACH TYPE OF LIGHTING FIXTURE

Chalmit

/UK

PRXB/05L/L E/EM/BP/3H

LUMIN IND, EMERGENCY LED LINEAR LUMINAIRE, LED, MOUNTING ON PIPE 42MM DIAMETER, POWER CONSUMPTION 38W INDUSTRIAL LUMINAIRES ; TYPE : EMERGENCY LED LINEAR LUMINAIRE ; APPLICATION : HAZARDOUS AREA ; INGRESS

PROTECTION : IP66/IP67 ; CLASSIFICATION, HAZARD AREAS : ZONE 1; EN/IEC 60079 ; TYPE, LAMP : LED ; LAMPHOLDER : MOUNTING ON PIPE 42MM DIAMETER; MOUNTING: PIPE CLAMP ; CABLE ENTRY : M20

; LAMP CHANGING : MIN 200,000 HOURS, B50/L70 (IESNA LM-80); POWER RATE: 38W: VOLTAGE INPUT: 230VAC, 50HZ; EXPLOSION PROTECTION: II 2 G IIC T4 GB: EX DB, EB, DE OR EX E (OR EQUIVALENT WHICH IS SUITABLE FOR ZONE 1 APPLICATION); MINIMUM 5700LM: RA=70; 5000K-7000K; 9.6KG; IK10 (IEC 62262); SURGE PROTECTION 4KV; BATTERY, EMERGENCY LIGHT OPERATION TIME 3 HOURS MINIMUM; AMBIENT TEMPERATURE: 0 TO 45 DEGREE C; DRILLED HOLES: 3XM20; CABLE ENTRY M20; THROUGH WIRING 4X2.5M2; INSTALLED TERMINAL STRIP: PE + N + L1

+ L2 + L3 + L; 5-YEARS WARRANTY; WITH SELF-TEST FUNCTION; ACCESSORIES INCLUDED; PIPE CLAMP FITTED IN MOUNTING RAIL, 01 PAIR BOLTS & NUTS, MATERIAL: STAINLESS STEEL SS316, MOUNTING ON PIPE 42MM DIAMETER; 01 STOPPING PLUG; 01 EX CABLE GLAND (METAL): M20X1.5, EX D/ EX E IIC IP66, SHROUD, LOCKNUT, SERRATED WASHER, ENTRY THREAD SEAL, NOTE: CABLE GLAND MUST BE SUITABLE TO INSTALL FOR THE LUMINAIRE; IF CABLE ENTRY M25, THEN 01 EX CABLE GLAND (METAL) M25X1.5 IS REQUIRED; MANDATORY DOCUMENTS TO BE PROVIDED TOGETHER WITH THE PROPOSAL: 1. SAMPLE TESTING CERTIFICATE OF THIRD PARTY INCLUDING: WATTAGE, LUMENS, INGRESS PROTECTION IP66, COLOUR TEPERATURE CCT, CRI, IK08: 2. CO/CQ FOR LINEAR LUMINAIRE; 3. IECEX CERTIFICATE OF CONFORMITY; AT LEAST ONE TESTING CERTIFICATE FOR EACH TYPE OF LIGHTING FIXTURE

Chalmit

/UK