Safety Sensors | Bns 260-02Z-St-L | Schmersal Vietnam | Pitesco Việt Nam

Liên hệ

D5 Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh


PITESCO Việt Nam - Công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng xu hướng công nghiệp hóa, hiện đại hóa

Liên hệ cho chúng tôi theo số 0912 979 551 để  thông tin mà Quý khách CẦN.    

Email :  quyen.pitesco@gmail.com


Ordering details
 
Product type descriptionBNS 260-02Z-ST-L
Article number101184377
EAN code4030661321752
 
Approval
 
Approval
 BG
 USA/CAN
 
Classification
 
StandardsEN ISO 13849-1

B10d Opener (NC)
25.000.000
- noticeat max. 20% contact load
Mission time20 Years
notice
 
Global Properties
 
Product nameBNS 260
StandardsIEC 60947-5-3, BG-GS-ET-14
Compliance with the Directives (Y/N) Yes
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
Weight20 g
Coding available (Y/N)Yes
Monitoring function of downstream devices (Y/N)No
Prerequisite evaluation unit
Recommended safety-monitoring module
Recommended actuatorBPS 260
 
Mechanical data
 
Design of electrical connectionConnector M8
mechanical installation conditionsquasi-flush
Active area
Ensured switch distance ON5 mm
Ensured switch distance OFF15 mm
Type of actuationMagnet
Direction of motionhead-on with regard to the active surface
restistance to shock30 g / 11 ms
Resistance to vibration10 ... 55 Hz, Amplitude 1 mm
Door hingeleft
notice
Axial misalignment
The safety sensor and the actuator tolerate a horizontal and vertical misalignment to each other. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor is active in the tolerance range.
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25 °C
- Max. environmental temperature+70 °C
Storage and transport temperature
- Min. Storage and transport temperature−25 °C
- Max. Storage and transport temperature+70 °C
Protection classIP67
 
Electrical data
 
Integrated Safety monitoring module available (Y/N)No
Cross circuit/short circuit recognition possible (Y/N)Yes
Voltage typeVDC
Switch frequencymax. 5 Hz
Switching voltagemax. 75 VDC
Switching currentmax. 400 mA
Switching capacitymax. 10 VA
 
Outputs
 
Design of control output
Number of shutters0 piece
Number of openers2 piece
Design of output signal switching device
 
Electrical data - Safety outputs
 
Number of secure semi-conductor outputs0 piece
Number of secure outputs with contact2 piece
 
Electrical data - Diagnostic output
 
Number of semi-conductor outputs with signaling function0 piece
Number of outputs with signaling function that already have a contact0 piece
 
LED switching conditions display
 
LED switching conditions display (Y/N)No
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor26 mm
- Height of sensor36 mm
- Length of sensor13 mm
 
notice
 
Contact symbols shown for the closed condition of the guard device.
The contact configuration for versions with or without LED is identical.
The number in brackets indicate the PIN number of the connector.
Contact S21-S22 und S11-S12 must be integrated in the safety circuit
 
Included in delivery
 
Actuators must be ordered separately.
 
Diagram
 



Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

Bình luận

HẾT HẠN

0912 979 551
Mã số : 7239612
Địa điểm : Hồ Chí Minh
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 14/04/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn