Cảm biến tiệm cận từ cảm loại tròn - Sử dụng IC chế tạo theo công nghệ C-MOS (Hàng đầu thế giới) - Khả năng chống nhiễu tốt - Bảo vệ IP67 (chống bụi, chống nước)
- Có mạch bảo vệ nối ngược cực nguồn, quá áp.
- Có thể kiểm tra trạng thái hoạt động bằng chỉ thị LED Đỏ
- Tuổi thọ dài và độ tin cậy cao
- Khoảng cách phát hiện: 1,5mm, 2mm, 4mm, 5mm, 8mm, 10mm, 15 mm
- Kích thước: M8, M12, M18, M30 mm
- Nguồn cấp: Loại 3 dây nguồn 12-24 VDC hoặc 2 dây nguồn 100~240VAC
- Tần số đáp ứng nên tới 800 Hz.
- Kiểu đầu ra: DC 3dây (NPN, PNP), DC 2 dây, AC 2 dây.
- Trạng thái đầu ra: NO / NC
- Với khả năng phát hiện vật thể từ tính (Kim loại), Cảm biến từ cảm Hanyoung phù hợp với các ứng dụng phát hiện, đếm sản phẩm trong các dây truyền công nghiệp....
del | NPN | UP8RM-1.5N | UP8RD-2N | UP12RM-2N | UP12RD-4N | UP18RM-5N | UP18RD-8N |
PNP | UP8RM-1.5P | UP8RD-2P | UP12RM-2P | UP12RD-4P | UP18RM-5P | UP18RD-8P |
Size | M8 | M12 | M18 |
Shield | Shield | None shield | Shield | None shield | Shield | None shield |
Standard sensing object mm | Iron 8 X 8 X 1 | Iron 12 X 12 X 1 | Iron 18X18X1 | Iron 25 X 25 X 1 |
Sensing distance | 1.5 mm | 2 mm | 2 mm | 4 mm | 5 mm | 8 mm |
Setting distance | 0 ~ 1.2 mm | 0 ~ 1.6 mm | 0 ~ 1.6 mm | 0 ~ 3.2 mm | 0 ~ 4 mm | 0 ~ 6.4 mm |
Hysteresis | Less than 10% of sensing distance |
Response frequency | 800 Hz | 800 Hz | 400 Hz | 350 Hz | 200 Hz |
Power supply voltage | 12 ~ 24 V d.c (Usable voltage range 5 - 35V d.c) |
Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage : Max 1.5 V |
Current consumption | Max 6 mA |
Operation indication | Red LED |
Protective circuit | Power reversely comeded prodective circuit, surge prote ctive circuit and over current protective circuit are built in. |
connection structure | Cable type (standard cable length 2m), Relay connector type, Connector type |
Material | Case: stainless, Sensing surface: PBT, Cable holder: Polyester elastomer | Case: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer |
Weight | Cable type | approx. 60g | approx. 60g | approx. 70g | approx. 70g | approx. 120g | approx. 120g |
Relay connector type | None | None | approx. 30g | approx. 30g | approx. 80g | approx. 80g |
Connector type | None | None | approx. 30g | approx. 30g | approx. 60g | approx. 60g |
Inductive D.C 3 Wire type Model | NPN | UP18RLM-5N | UP18RLD-8N | UP30RM-10N | UP30RD-15N | UP30RLM-10N | UP30RLD-15N |
PNP | UP18RLM-5P | UP18RLD-8P | UP30RM-10P | UP30RD-15P | UP30RLM-10P | UP30RLD-15P |
Size | M18 | M30 | M30 |
Shield | Shield | None shield | Shield | None shield | Shield | None shield |
Standard sensing object mm | Iron 18 X 18 X 1 | Iron 25 X 25 X 1 | Iron 30 X 30 X 1 | Iron 45 X 45 X 1 | Iron 30 X 30 X 1 | Iron 45 X 45 X 1 |
Sensing distance | 5 mm | 8 mm | 10 mm | 15 mm | 10 mm | 15 mm |
Setting distance | 0 ~ 4 mm | 0 ~ 6.4 mm | 0 ~ 8 mm | 0 ~ 12 mm | 0 ~ 8 mm | 0 ~ 12 mm |
Hysteresis | Less than 10% of sensing distance |
Response frequency | 350 Hz | 200 Hz | 250 Hz | 100 Hz | 250 Hz | 100 Hz |
Power supply voltage | 12 ~ 24 V d.c (Usable voltage range5 - 35V d.c) |
Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual : Max1.5 V |
Current consumption | Max 6 mA |
Operation indication | Red LED |
Protective circuit | Power reversely connected protective circuit, Surge protective circuit and over current protective circuit are bult in. |
connection structure | Cable type (standard cable length 2m), Relay connector type, Connector type |
Material | Case : brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer |
Weight | Cable type | approx. 140g | approx. 140g | approx. 170g | approx. 170g | approx. 220g | approx. 220g |
Relay connector type | approx. 100g | approx. 100g | approx. 130g | approx. 130g | approx. 180g | approx. 180g |
Connector type | approx. 80g | approx. 80g | approx. 150g | approx. 150g | approx. 200g | approx. 200g |
Inductive D.C 2 wire type (Polrity/No polarity) Model | 유극성 | UP8RM-1.5T | UP8RD-2T | UP12RM-2T | UP12RD-4T | UP18RM-5T | UP-18RD-8T |
무극성 | UP8RM-1.5U | UP8RD-2U | UP12RM-2U | UP12RD-4U | UP18RM-5U | UP-18RD-8U |
Size | M8 | M12 | M18 |
Shield | Shield | None shield | Shield | None shield | Shield | None shield |
Standard sensing object mm | Iron 8 X 8 X 1 | Iron 12 X 12 X 1 | Iron 18X18X1 | Iron 25X25X1 |
Sensing distance | 1.5 mm | 2 mm | 2 mm | 4 mm | 5 mm | 8 mm |
Setting distance | 0 ~ 1.2 mm | 0 ~ 1.6 mm | 0 ~ 1.6 mm | 0 ~ 3.2 mm | 0 ~ 4 mm | 0 ~ 6.4 mm |
Hysteresis | Less than 10% of sensing distance |
Response frequency | 800 Hz | 800 Hz | 400 Hz | 800 Hz | 400 Hz |
Power supply voltage | 12 ~ 24 V d.c (Usable voltage range10 - 30V d.c) |
Control output | Open/Close capacitance : 100 mA Max.(Resistive load), Residual voltage: T (polarty) : max 3.5 V, U (No polarity): max5V |
Leakage current | Max 1 mA |
Operation indication | Red LED |
Protective circuit | Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built in. |
connection structure | Cable type(standard cable length 2 m), Relay connector type, Connector type |
Material | Case: stainless, Sensing surface:PBT, Cable holder: Polyester elastomerr | Case: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer |
Weight | Cable type | approx. 60g | approx. 70g | approx. 120g | approx. 120g |
Relay connector type | None | approx. 30g | approx. 80g | approx. 80g |
Connector type | None | approx. 30g | approx. 60g | approx. 60g |
Inductive D.C 2 wire type Model | Polarity | UP18RLM-5T | UP18RLD-8T | UP30RM-10T | UP30RD-15T | UP30RLM-10T | UP30RLD-15T |
No Polarity | UP18RLM-5U | UP18RLD-8U | UP30RM-10U | UP30RD-15U | UP30RLM-10U | UP30RLD-15U |
Size | M18 | M30 | M30 |
Shield | Shield | None shield | Shield | None shield | Shield | None shield |
Standard sensing object mm | iron 18 X 18 X 1 | iron 25 X 25 X 1 | iron 30 X 30 X 1 | iron 45 X 45 X 1 | iron 30 X 30 X 1 | iron 45 X 45 X 1 |
Sensing distance | 5 mm | 8 mm | 10 mm | 15 mm | 10 mm | 15 mm |
Setting distance | 0 ~ 4 mm | 0 ~ 6.4 mm | 0 ~ 8 mm | 0 ~ 12 mm | 0 ~ 8 mm | 0 ~ 12 mm |
Hysteresis | Less than 10% of sensing distance |
Response frequency | 800 Hz | 400 Hz | 250 Hz | 100 Hz | 250 Hz | 100 Hz |
Power supply voltage | 12 ~ 24 V d.c (Usable voltage range10 - 30V d.c) |
Control output | Open/Close capacitance : 100 mA Max. (Resistive load), Residual voltage: T(Polarity) : max 3.5 V, U(No polarity) :max 5 V |
Leakage current | Max 1 mA |
Operation indication | Red LED |
Protective circuit | Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built in. |
connection structure | Cable type(standard cable length2 m), Relay connector type, Connector type |
Material | Case: brass(chrome plating), Sensing surface: PBT, Cable holder : Polyester elastomer |
Weight | Cable type | approx. 140g | approx. 140g | approx. 170g | approx. 220g |
Relay connector type | approx. 100g | approx. 100g | approx. 130g | approx. 180g |
Connector type | approx. 80g | approx. 80g | approx.110g | approx. 200g |
Inductive A.C 2 wire type Model | For A.C | UP12RM-2A | UP12RD-4A | UP18RM-5A | UP18RD-8A | UP18RLM-5A |
Size | M12 | M18 | M18 |
Shield | Shield | None shield | Shield | None shield | Shield |
Standard sensing object | Iron 12 x 12 x 1 mm | Iron 18 x 18 x 1 mm | Iron 25 x 25 x 1 mm | Iron 18 x 18 x 1 mm |
Sensing distance | 2 mm | 4 mm | 5 mm | 8 mm | 5 mm |
Setting distance | 0 ~ 1.6 mm | 0 ~ 3.2 mm | 0 ~ 4.0 mm | 0 ~ 6.4 mm | 0 ~ 4.0 mm |
Hysteresis | Less than 10% of sensing distance |
Response frequency | 20 Hz |
Power supply voltage | 100 ~ 240 V a.c(Usable voltage range90 - 250 V a.c) |
Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V |
Leakage current | Max 2.2 mA |
Operation indication | Red LED |
Protective circuit | Surge Protective circuit built in. |
connection structure | Cable type(standard cable length 2 m), Relay connector type, Connector type |
Material | Case: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer |
Weight | Cable type | approx. 70g | approx. 70g | approx. 120g | approx. 140g |
Relay connector type | approx. 30g | approx. 30g | approx. 80g | approx. 100g |
Connector type | approx. 30g | approx. 30g | approx. 60g | approx. 80g |
Inductive A.C 2 wire type Model | For A.C | UP18RLD-8A | UP30RM-10A | UP30RD-15A | UP30RLM-10A | UP30RLD-15A |
Size | M18 | M30 | M30 |
Shield | None shield | Shield | None shield | Shield | None shield |
Standard sensing object | 철 25 x 25 x 1 mm | 철 30 x 30 x 1 mm | 철 45 x 45 x 1 mm | 철 30 x 30 x 1 mm | 철 45 x 45 x 1 mm |
Sensing distance | 8 mm | 10 mm | 15 mm | 10 mm | 15 mm |
Setting distance | 0 ~ 6.4 mm | 0 ~ 8.0 mm | 0 ~ 12.0 mm | 0 ~ 8.0 mm | 0 ~ 12.0 mm |
Hysteresis | Less than 10% of sensing distance |
Response frequency | 20 Hz |
Power supply voltage | 100 ~ 240 V a.c(Usable voltage range90 - 250 V a.c) |
Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V |
Leakage current | Max 2.2 mA |
Operation indication | Red LED |
Protective circuit | Surge Protective circuit built in. |
connection structure | Cable type(standard cable length 2 m), Relay connector type, Connector type |
Material | Case: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer |
Weight | Cable type | approx. 140g | approx. 170g | approx. 170g | approx. 220g | approx. 220g |
Relay connector type | approx. 100g | approx. 130g | approx. 130g | approx. 180g | approx. 180g |
Connector type | approx. 80g | approx. 150g | approx. 150g | approx. 200g | approx. 200g |
Bình luận