Td-1000 C Oil In Water Monitor | Turner Designs Hydrocarbon Instruments | Pitesco Vietnam Đại Lý Phân Phối

Liên hệ

D5 Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miễu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479

0162.999.888.7

Email : vinhmv.pitesco@gmail.com

TD-1000 C

Download Technical Data Sheet

Measures Oil in Water: Continuous on-line monitor measures ppb or ppm
oil in water

Boiler, Cooling System and Environmental Protection with earliest oil leak detection on the market

UV Fluorescence technology provides highest sensitivity available

Highest sensitivity = lowest detection limit = earliest warning of oil contamination

The field-proven TD-1000C is rugged and reliable with the lowest maintenance in the industry. Its fluorescence sensor technology provides high accuracy and repeatibility as well as the earliest leak detection available. It delivers the same remarkable performance expected of all Turner Designs Hydrocarbon Instruments'' products.

It comes to you complete and ready to be installed in your system with a pressurized side stream from the process. It includes 316SS mounting bracket and isolation valves. The sample remains pressurized for easy return to the process or to atmospheric drain. An on-board Cell Condition Monitor alerts operations if the measurement cell requires cleaning. Includes standard alarm relays and 4-20mA output for remote monitoring.

Applications	Steam Condensate, Boiler Feed, Cooling Water, Clean Water
Operational Principle	UV Fluorescence
Hydrocarbons	Fuel Oil, Crude Oil, Other Fuels and Oils
Detection Range Fuel Oil, Crude Oil	20ppb in Steam Condensate - 500ppm
Response Time	5 seconds spike change, continuous reading
Local Display	PPM, PPB, Or Raw Fluorescence Units (RFU)
Controls	External Touch Pad
Power Requirements	90 - 250 VAC, 5A
Alarms	Solid State AC Relay High Alarm (3A fused, 90 - 250 VAC), 5VDC Cell Condition Alarm, 5VDC System Alarml
Outputs	4-20mA Powered, 500ohm. Max Impedance
Diagnostics	Self Diagnostics, internal failure linked to alarm
Communication Protocols	(Unidirectional Hart, Mod Bus Optional)
Mounting & Plumbing Hardware	316 SS
Plumbing Requirements	See General Arrangement Drawing
Flow Cell Characteristic	Quartz Closed Tube with Cell Contition Monitor and Alarm
Pressurized Sample Return	Yes, or Unpressurized to Drain
Typical Flow Rates	100mL/min to 4L/min
Min / Max Sample Pressure	5psig / 100psig, 0.35barg / 6.9barg
Max Sample Temperature	71°C, 160°F (Sample Cooler is Optional)
Ambient Operating Temperature	32°F - 120°F, 0°C - 49°C
Calibration Stability	+/- 10% over 6 Months
Calibration	Blank / Standard Addition via Syringe Injection Port
Reagents	None
Security	Password Protected
Communication Protocols	Optional: Hart, Mod Bus
Diagnostics	Self Diagnostics, internal failure linked to alarm, Cell Condition
Security	Password Protects Software, Lockable Enclosure
Electronics Cabinet	Non Metallic
Enclosure Rating	Approximates NEMA 4X and IP 65
Maintenance	Calibration Check, Clean Flow Cell on Alarm
Cleaning Chemicals	Detergents, Dilute HCL, or Solvents (Customer Furnished)
Explosion Proof Options	Gen Purpose Only (Use TD-4100 XDC for Explosion Proof Areas)
Sample Pump	Optional
Certifications	CE Marked, CUL

Từ khóa gợi ý: Đại Lý Phân Phối Đại Lý Phân Phối Mở Đại Lý Phân Phối Đại Lý Phân Phối Kia Đại Lý Phân Phối Bia Đại Lý Phân Phối Case Tìm Đại Lý Phân Phối Đại Lý Phân Phối Đường Đại Lý Phân Phối Sim Tìm Đại Lý Phân Phối Đại Lý Phân Phối 4G Nhà Phân Phối Đại Lý Đại Lý Phân Phối Thẻ Cào Phân Phối Thẻ Cho Đại Lý Đại Lý Phân Phối Máy Lọc Đại Lý Phân Phối Tại Đà Các Đại Lý Phân Phối Của Đại Lý Phân Phối Xe Gắn Đại Lý Phân Phối Xe Kia Tìm Đại Lý Phân Phối Sim

Bình luận

Mai Văn Vinh

HẾT HẠN

Mã số :	8705630
Địa điểm :	Hồ Chí Minh
Hình thức :	Cần bán
Tình trạng :	Hàng mới
Hết hạn :	31/12/2020
Loại tin :	Thường