T5200| T5220| T5221 | T5400 | T5420 | T5700 | T6000 | Fairchild | Pressure Transducer| Bộ Chuyển Áp

Công ty PITESCO chuyên phân phối các thiết bị công nghiệp tự động hóa như  điện công nghiệp, cảm biến, biến tần; PLC,...của các hãng Đức, Ý, Nhật,... 

Xin vui lòng liên hệ với chúng tôi để được tư vấn kỹ thuật và hỗ trợ giá tốt.

Ms Xuân

Sales Dept

Cellphone: 0912.979.551                            

email: xuan.pitesco@gmail.com

Industrial Process Transducers

The Process Control line of I/P Transducers utilizes a flapper and nozzle attached to a voice coil to proportionally regulate the output pressure. The Fairchild T5200, T5400, T5700 and T6000 pressure transducer series offer dependable performance at economical prices. The new T6100 I/P unit also offers "Lock in Last Place" reliability in an easy to use product configuration.

Fast Response E/P, I/P Pressure Transducers (T5200) The T5200 Transducer is a Fast Response I/P, E/P Ptressure Transducer controlled by a 4-20 mA current in a control loop. With its reliable signal conversion and pneumatic circuit sections, the T5200 I/P Pressure Transducer provides fast response to input signal changes, resulting in faster loop control and savings in process materials. Its minimal air consumption allows you to use the T5200 in systems where operating gas is expensive. Five available input signal ranges deliver the versatility to meet most process and machine requirements.

Fast Response High Flow E/P, I/P Pressure Transducers (T5220) As a Fast Response High Flow I/P, E/P Pressure Transducer, the T5220 has all the performance you want in a voice coil I/P transducer product, but it also includes a built in booster section to deliver high flow capacity, up to 45 SCFM (76.5 m3/HR) with six available rations to allow pressure multiplication to the output. This feature, along with the adjustable positive and negative bias allows you to custom design your control system for exactly the desired performance.

Adjustable Ratio, E/P, I/P Pressure Transducer (T5221) When your application requires a very specific control system, look to the T5221 Adjustable Ratio I/P, E/P Pressure Transducer. The Fairchild T5221 I/P pressure transducer has all the response and flow performance features of the T5200 series, with the addition of an Adjustable Gain which allows this single device to cover most industrial and process control requirements.

Digital Pressure Transducer (T5400) Our T5400 Transducer is a Digital-Pneumatic device that provides a pneumatic output signal controlled by 8 bit digital data instructions from a central control room, a remote control location, or a local control station. Its Fail Safe High or Low will return the output to 3 psig for Direct Acting Mode or to 15 psig for Reverse Acting Mode if the power is lost, regardless of the logic selected.

Digital High Flow E/P, I/P Pressure Transducer (T5420) The T5420 is a Digital-Pneumatic Transducer, compatible with most digital systems using TTL and CMOS Logic. Its Fail safe High or Low will return the field reversible output to 3 psig for Direct Acting Mode or to 15 psig for Reverse Acting Mode if the power is lost, regardless of the logic selected. The Integral Volume Booster Output of the T5420 meets input requirements of final control elements requiring a higher capability output signal, increased output pressure, and/or increased flows.

High Flow E/P, I/P Pressure Transducers (T5700) Rotork Fairchild''s Model T5700 is a High Flow I/P, E/P Pressure Transducer that converts a current signal to a linear pneumatic output, using a force balance system with a flapper and the nozzle to control the pressure in the intermediate housing. Its low droop under flow conditions allows improved control of downstream pressure. Additionally, the T5700 has high flow and is virtually immune to supply pressure change, which permits use of normal plant air. The T5700''s minimal air use in dead end service (.05 SCFM) dramatically reduces air consumption.

Compact E/P, I/P Pressure Transducers (T6000) The T6000 Compact Size I/P, E/P Pressure Transducers are field reversible units that provide an output directly or inversely proportional to the input signal. Its six available output pressure ranges and six available input signal ranges meet most process and machine requirements. The T6000 Series is designed for precision E/P, I/P pressure transducer applications providing maximum versatility. The modular construction permits any basic unit to be used in the explosion-proof, rack, wall, pipe, panel, DIN rail or 3, 5, 10, or 15 unit manifold configurations and servicing or calibration is quick and easy.

Lock in Place I/P Pressure Transducers (T6100) Uniquely designed by Fairchild, the T6100 "Lock in Last Place" I/P Pressure Transducer provides flexibility, reliability and safety in applications requiring protection from signal failures to critical control system instruments. Its simple yet effective voice coil actuation now Locks in "Last Position" to accurately capture the setpoint with extremely low drift after a power loss permits the T6100 to maintain set point. The unit''s IP65 rating allows you to handle moist applications with ease.