Loadcell Flintec, Máy Kiểm Tra Loadcell Type Lct-11 Load Cell Tester, Ype Lcs-1/Lcs-1D Load Cell Simulator,

Data Sheet Quick User Guide

Product Description

The type LCT-11 is a stand-alone hand-held device that was especially designed for full trouble shooting of strain-gage based load cells.
Type LCT-11 can check all common types of standard load cells that are available on the market: 4 or 6 wires @ all rated gain outputs.
It provides the user with all essential data needed about the tested load-cell: bridge resistance and integrity, physical distortion (possibly caused by overload, shock load or metal fatigue) and it checks the insulation resistance that can point to moisture or chemical ingress.

Key Features

• Fast testing of load cells* and scales
• Can be used to check multi load-cell scale alignment
• Continuous signal reading allows checking of linearity and repeatability
• Very user friendly, full test within 5 seconds
• Alphanumeric display: 16 characters, 2 lines
• Rugged ABS enclosure
• 8-pin connector with screw terminals (supplied with the unit)
• Uses standard batteries 4x type AA (not supplied)
• Size: 150 mm x 80 mm x 28 mm
• Weight:  250 g
  
  * only suitable for analogue load cells

Data Sheet

Application

• Testing and troubleshooting of weighing indicators and weighing systems
• Ideal tool for testing of dosing and filling applications
• Training and education on weighing electronics

Key Features LCS-1

• Simulates the analogue signal of one strain gauge load cell
• Powered from the connected weighing electronics (e.g. 5 V)
• Input resistance: 1 000 Ω
• Output signal: 0...2 mV/V, adjustable by a rotary knob
• Rugged ABS enclosure, 83 x 54 x 33 mm
• Packed weight: 200 g

Key Features LCS-1D

• Emulates one digital RC3D load cell
• RS485 half duplex interface, compatible with RC3D
• Output signal: 0...400 000 counts; adjustable by a rotary knob
• Power requirements: 9... 12 V DC, 40 mA
• Rugged ABS enclosure, 83 x 54 x 33 mm
• Packed weight: 200 g