Thiết Bị Đo Độ Ẩm Trong Dầu E+E, Moisture In Oil Measurement, Ee36-E+E, Ee381-E+E, Ee385-E+E, Oilport20 E+E Hand-Held Meter For Moisture In Oil

The oil condition sensors measure the moisture content of an oil in the same way as gas humidity. The measurements are output as absolute values in [ppm] or relative values as water content [aw].

• Products

The OILPORT20 hand-held meter is used for the online monitoring of the moisture content of lubrication and insulation oil. The moisture in oil measurement plays a considerable part in the long-term correct functioning of systems and machines.

Measurement parameters of OILPORT20

• Relative water content / water activity [aw]
• Absolute water content [ppm]
• Temperature [°C / °F]

Analogous to gas humidity, the moisture content of an oil can be specified absolutely in ppm or as relative water content aw.

• ppm (mass water / mass oil)
• aw (current water content in relation to the water content in a saturated oil sample) Completely water-free oil has an aw value of  0, completely saturated oil has an aw value of 1.

The OILPORT20 hand-held meter always determines the water activity aw and the temperature T. By entering oil-specific parameters, the hand-held meter can calculate the water content in ppm and show it in the display.

Two different sensors are available for various applications:

• 
  Pressure-tight oil sensor up to 20bar
  Together with the ball valve assembly set, the oil sensor can be fitted and removed without interrupting the oil circuit.
• 
  Short oil sensor Ø12mm
  Ideal for quickly determining the humidity of oil samples.

The hand-held meter comes in a practical case with batteries and a calibration certificate.