l | PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N | PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N | PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N PSC-MA-AB-N |
Output type | NPN voltage Output | NPN Open collector | Totem Pole Output |
Electrical specification | Output phase | A phase, B phase (*PSC-MB- - , PSC-MC- - , PSC-YC- - are available with Z phase output) |
Phase difference of output | Phase difference between A and B phase : T/4 ±T/8(1 cycle of A phase = T) |
Max. response | 180 KHz |
Power voltage | 12 - 24 V d.c(± 5%) |
Power consumption | Max. 60 mA |
Connection type | WIRE Connection |
Control output |
• Load Voltage : Max. 30 V | • Load Current : Max. 30 mA | • Remaining voltage : Max. 0.4 V |
|
• LOW | -Load Current : Max. 30 mA | -Remaining voltage : Max. 0.4 V | • HIGH | -Load Current : Max. 10 mA | -Remaining voltage : Min. 1.5 V |
|
Response speed | Max. 1 μs(Wire length : 2 m, lSINK = 30 mA) |
Mechanical specification | Moving torque | Max. 200 gf.cm(19600 uN.m) |
Shaft inertial moment | Max. 800 g.cm2 (8 x 10-6 kg.m2) |
Shaft allowable load | Radial : Below 0.1 mm, Thrust : Below 0.2 mm |
Max. allowable revolution | 5000 rpm |
Life span of bearing | 1.2 x 108 / rpm : Time |
Insulation resistance | Min. 500 MΩ (Between all terminals and case) |
Dielectric strength | 500 V a.c (Between all terminals and case for 1 minute at 50 Hz) |
Vibration | 10 - 55 Hz(for 1 minute cycle), double amplitude width : 1.5mm, in each direction of X Y Z for 2 hours |
Shock | Max. 75G |
Operating ambient temperature | -10 ~ 60 °C(Without freezing), Storage : -25 ~ 85 °C |
Operating ambient humidity | 35 ~ 85 % R.H. |
Protection | IP 50(IEC Standard) |
Cable | 5P, Ø6.0 mm, Length : 2m(Shielded cable) |
Weight | About 657 g |
Bình luận