PITESCO VIETNAM PHÂN PHỐI THIẾT BỊ Pilz | ĐẠI LÝ ĐỘC QUYỀN TẠI ViỆT NAM
Vui lòng liên hệ với chúng tôi để được tư vấn và hỗ trợ giá tốt nhất.
Nguyễn Ngọc Nam
[Senior Sales Eng.]
=============
Cellphone: 01666.455.335 | 0914.23.7179
Technical data
Measuring ranges" –80 ... 50 °C td, –20 ... 70 °C, 0 ...100 % rel.h.Further parameters can be programmed by
BEKO TECHNOLOGIES upon customer request:ppmV/V, atmospheric dew point,g/m³, mg/m³, g/kg, or °F
Accuracy : ± 0.5 °C td (–10... 50 °C td), typical ± 2 °C td at –40 °C td
Pressure range
Installation without measuring chamber:–1 to 50 bar
Installation with a measuring chamber: up to 16 bar
Operating temperature:–20 ... 70 °C measuring gas temperature,0 ...50 °C ambient temperature
Measuring-chamber connection: Internal thread G½“ / G¼“ Plug nipple NW 7.2; G¼“ external,for quick-release coupling
Screw-in thread : R½“ stainless stee
Purge air demand : 16 l/min when the measuring chamber is installed (for 7 bar)
Housing material : Polycarbonate
Protection class : IP 65
EMV : DIN EN 61326
Weight : 340 g (without measuring chamber)
Power supply: Internal NiMH battery for approx. 15 h of operation, indication ”Low Bat. Max2h”,residual operating time, charging time:max. 2 h
Power supply unit 110 - 240 VAC, 50 - 60 Hz, 0.2 A24 VDC, 300 mA Safety category 2, for application in dry places only
Continuous operation :Long-term measurement with a power supply unit
Display:Single-line, resolution 0.1 Dew point (° C td), relative humidity (% rel.h.), : Temperature (° C or °F), depending on the factory setting
Display functions ": Min., max., battery status
Field of application : Designed for measurement downstream of a compressed air dryer (danger of contamination when employes upstream of a compressed-air dryer)
Bình luận