Flexidrum Dr 720 P Highflex

CVC VIETNAM CHUYÊN CUNG CẤP THIẾT BỊ HÃNG FLEXIDRUM TRÊN TOÀN QUỐC

CE

FLEXIDRUM  DR 720 P Highflex

Conductor: Insulation:

Colour code:

Stranding:

Inner sheath:

Construction:

bare copper strands acc. to IEC 60228

EN 60228, VDE 0295, class 5

special polymer

coloured acc. to HD 308 (VDE 0293 part 308);

from 6 cores black cores with consecutive numbers acc. to EN 50334; green-yellow earth wire from 3 cores

specially adjusted layering around central suspension unit partially with non-woven tape over the outer layer

PUR

Nominal voltage: Testing voltage:

Current-carrying capacity:

Min bending  radius: for laying and installation

(fixed laying):

for repeated winding action (flexible):

guided on deflection pulleys (flexible):

Technical  data:

0,6/1 kV

core/core 4000 V

acc. to DIN VDE 0298-4,

see appendix: current-carrying capacity

<12 mm 3 x d / >12 mm 4 x d

6 x d

7,5 x d

Supporting screen:   high-tech yarn

Temperature  range:

Outer sheath:

Sheath colour:

PUR

black (RAL 9005)

yellow (RAL 1021) PART. N. 07209...

Outstanding features

small outer diameter small cable weight

high winding and unwinding

strength

corresponds to low voltage guideline 73/23/EWG CE

for SPEEDS and MINIMUM BENDING RADIUS

see pages 4/5/6/7 of catalogue

Application:

FLEXIDRUM  DR 720 P Highflex  is used on heavy appliances like motor cable reels hoists, transport systems,  movable motors  and

farm vehicles  with high mechanical stress.

fixed laying:

flexible application:

Max speed:

Halogen free: Oil resistance:

Chemical resistance: Fire performance:

UV-resistance:

Tensile strenght: Mechanical

characteristics:

-50/+90  C

-40/+90  C

120 m/min. Please enquire us for higher speed.

acc. to DIN VDE 0472 part 815 and IEC 60754-1 very good - TMPU acc. to DIN VDE 0282

part 10 + HD 22.10

good against acids, alkalines, solvents, hydraulic liquids, etc.

flame retardant and self-extinguishing acc. to

IEC 60332-1-2 and EN 60332-1-2

very good

enhanced due to black sheath colour

with reference to

DIN VDE 0298-300

the main mechanical characteristics accomplished by the PUR outer sheath are:

- high tensile strength

- high tear strength

- high abrasion resistance

- high notch resistance

Part no.

No. of cores x cross section n x mm

       07200415      4G1.5                 9.1          57.6            111                 1340              16      

1. 07200440                 4G4            12.5            153.6            240               1690               12

       07200515      5G1.5                 9.9          72.0            133                 1690              16      

07200740                 7G4            16.6            268.8            240                  -                  12

       07200715      7G1.5               11.9        100.8            193                 2150              16      

07201640                16G4            23.9            614.4         910.6                  -                  12

       07201215      12G1.5              16.7        172.8            341                 2600              16      

       07201815      18G1.5              16.5        259.2            411                 2600              16      

       07200425      4G2.5               10.5         96.0            163                 1345              14      

       07200525      5G2.5               11.7        120.0            200                 2100              14      

       07200725      7G2.5               13.9        168.0              -                                          14      

       07200725      12G2.5              19.7        288.0            506                 2900              14      

       07201825      18G2.5              19.6        432.0            611                 3450              14      

       07202425      24G2.5              23.9        576.0            843                 2700              14      

07200460                 4G6            14.6            230.4            344               1860               10

07200470                4G10            18.1            384.0            574               2300                 8

07200480                4G16            22.4            614.4            873               2800                 6

07200390         3x25+3G6            24.3            892.8          1181               3300                 4    

07200490                4G25            26.6            960.0          1341               3300                 4     

07200395         3x35+3G6            28.1          1180.8          1569               3300                 2     

07200495                4G35            31.2          1344.0          1880               3300                 2     

07200396       3x50+3G10            31.9          1728.0          2219               3800                 1     

       07203025      30G2.5              26.7        720.0          1057                 4200              14      

07209001    4G16+4x2x1.5          28.2            729.6              -                     -                     6     

       07205025      50G2.5              32.5      1200.0         1688                 6750              14      

07209002      4G35+25x1.5          37.4             1704       2286.5                  -                     2     

       07203625      36G2.5              26.8        864.0              -                    5000              14      

07209020     4G50+3x2x1            35.3             2069              -                     -                     1     

       07204225      42G2.5              28.7      1008.0             -                    5750              14      

07209021

4G50+7x2.5

39.2

2088              -                     -                    1

07205625

56G2.5

33.7

1344.0

1783

7900              14