Brand | Code - Description |
RTK Vietnam | RTK Motor + capacitor
ST 5113-15/-35 230V/50 Hz
spare parts list 5113-7060, pos. 410+420
weight: ca. 1,5 kg/pcMotor + capacitor
ST 5113-15/-35 230V/50 Hz
spare parts list 5113-7060, pos. 410+420
weight: ca. 1,5 kg/pc
(Model: AS80-4) |
RTK Vietnam | Replaced by: Motor control valve - Series MV 5311
in straightway form
DN 65, nominal pressure PN 25
Housing material Ductile iron EN-GJS-400-18-LT
Flanges with sealing surface DIN
Stem seal:
Roof rings PTFE / graphite
Characteristics / inflow. Equal percentage / on the cone
Hole plug, metal seat
Kvs value = 30 m³ / h, 30 mm stroke
Seat diameter 50 mm
Surface treatment with zinc-rich primer
CE marking according to the Pressure Equip-
ment Directive (PED)
max. allowable pressure according to DIN EN 1092
max. allowable temperature TS 250 ° C
Electric Actuator - Type ST 5113-35
Force of 6.0 kN, including manual adjustment
Phase 230 V, 50/60 Hz
Control speed mm 0.44 / s, stroke 30 mm
IP 65 protection
- Additional limit switches (2 pieces)
(- Model: ST 5113-35
Type: MKGBG0C00F000HF
WE-Nr. 24309101
230V 50/60Hz
0.44mm/s
6 KN, IP 55
Motor: 1500/1900 U/min 1.0
46VA
- RTK motor valve
Type: MV5311 CPL.DN65 PN25
W. N. 243091
DN 65, PN 25, Kvs 30, Hub 30
0-30 |
RTK Vietnam | Electric Actuator - Type ST 5113-35
Force of 6.0 kN, including manual adjustment
Phase 230 V, 50/60 Hz
Control speed mm 0.44 / s, stroke 30 mm
IP 65 protection
Column length 238 mm
Additional limit switches (2 pieces) |
RTK Vietnam | Replaced by: Motor control valve - Series MV 5311
in straightway form
DN 65, nominal pressure PN 25
Housing material Ductile iron EN-GJS-400-18-LT
Flanges with sealing surface DIN
Stem seal:
Roof rings PTFE / graphite
Characteristics / inflow. Equal percentage / on the cone
Hole plug, metal seat
Kvs value = 30 m³ / h, 30 mm stroke
Seat diameter 50 mm
Surface treatment with zinc-rich primer
CE marking according to the Pressure Equip-
ment Directive (PED)
max. allowable pressure according to DIN EN
1092
max. allowable temperature TS 250 ° C
(Type: MV5311 CPL.DN65 PN25
W. N. 243091
DN 65, PN 25, Kvs 30, Hub 30
0-30) |
RTK Vietnam | Pneumatic Actuators
Code: ST 6135.B6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 280 cm²
spring range 0.8..3.0 bar / stroke 35 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.A6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 530 cm²
spring range 0.8..2.8 bar / stroke 40 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.C6-7G
air supply max. 6 barg
diaphragm area 530 cm²
spring range 0.7..3.0 bar / max. stroke 60 mm
safety position: spring to close |
Brand | Code - Description |
RTK Vietnam | RTK Motor + capacitor
ST 5113-15/-35 230V/50 Hz
spare parts list 5113-7060, pos. 410+420
weight: ca. 1,5 kg/pcMotor + capacitor
ST 5113-15/-35 230V/50 Hz
spare parts list 5113-7060, pos. 410+420
weight: ca. 1,5 kg/pc
(Model: AS80-4) |
RTK Vietnam | Replaced by: Motor control valve - Series MV 5311
in straightway form
DN 65, nominal pressure PN 25
Housing material Ductile iron EN-GJS-400-18-LT
Flanges with sealing surface DIN
Stem seal:
Roof rings PTFE / graphite
Characteristics / inflow. Equal percentage / on the cone
Hole plug, metal seat
Kvs value = 30 m³ / h, 30 mm stroke
Seat diameter 50 mm
Surface treatment with zinc-rich primer
CE marking according to the Pressure Equip-
ment Directive (PED)
max. allowable pressure according to DIN EN 1092
max. allowable temperature TS 250 ° C
Electric Actuator - Type ST 5113-35
Force of 6.0 kN, including manual adjustment
Phase 230 V, 50/60 Hz
Control speed mm 0.44 / s, stroke 30 mm
IP 65 protection
- Additional limit switches (2 pieces)
(- Model: ST 5113-35
Type: MKGBG0C00F000HF
WE-Nr. 24309101
230V 50/60Hz
0.44mm/s
6 KN, IP 55
Motor: 1500/1900 U/min 1.0
46VA
- RTK motor valve
Type: MV5311 CPL.DN65 PN25
W. N. 243091
DN 65, PN 25, Kvs 30, Hub 30
0-30 |
RTK Vietnam | Electric Actuator - Type ST 5113-35
Force of 6.0 kN, including manual adjustment
Phase 230 V, 50/60 Hz
Control speed mm 0.44 / s, stroke 30 mm
IP 65 protection
Column length 238 mm
Additional limit switches (2 pieces) |
RTK Vietnam | Replaced by: Motor control valve - Series MV 5311
in straightway form
DN 65, nominal pressure PN 25
Housing material Ductile iron EN-GJS-400-18-LT
Flanges with sealing surface DIN
Stem seal:
Roof rings PTFE / graphite
Characteristics / inflow. Equal percentage / on the cone
Hole plug, metal seat
Kvs value = 30 m³ / h, 30 mm stroke
Seat diameter 50 mm
Surface treatment with zinc-rich primer
CE marking according to the Pressure Equip-
ment Directive (PED)
max. allowable pressure according to DIN EN
1092
max. allowable temperature TS 250 ° C
(Type: MV5311 CPL.DN65 PN25
W. N. 243091
DN 65, PN 25, Kvs 30, Hub 30
0-30) |
RTK Vietnam | Pneumatic Actuators
Code: ST 6135.B6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 280 cm²
spring range 0.8..3.0 bar / stroke 35 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.A6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 530 cm²
spring range 0.8..2.8 bar / stroke 40 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.C6-7G
air supply max. 6 barg
diaphragm area 530 cm²
spring range 0.7..3.0 bar / max. stroke 60 mm
safety position: spring to close |
RTK Instruments Vietnam | Replacement for W.Nr 6092039/05
Level transducer, Typ NI 1331 with inductive weight measuring of the displacer
pressure rating PN 40
screw-in thread G 1
measuring range 800 mm
chain length 625 mm
output signal 4..20 mA, 220 Ohm
power supply 24 V DC
- with LED-display
- with bus system CANopen
Remarks : the NI 1321 is already obsolete and has been replaced with the new version NI 1331
LEVEL CONTROLLER
Baureine : NI 1321
We- Nr. : 6092039/050
800mm |
Brand | Code - Description |
RTK Vietnam | Pneumatic Actuators
Code: ST 6135.B6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 280 cm²
spring range 0.8..3.0 bar / stroke 35 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.A6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 530 cm²
spring range 0.8..2.8 bar / stroke 40 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.C6-7G
air supply max. 6 barg
diaphragm area 530 cm²
spring range 0.7..3.0 bar / max. stroke 60 mm
safety position: spring to close |
Brand | Code - Description |
RTK Vietnam | RTK Motor + capacitor
ST 5113-15/-35 230V/50 Hz
spare parts list 5113-7060, pos. 410+420
weight: ca. 1,5 kg/pcMotor + capacitor
ST 5113-15/-35 230V/50 Hz
spare parts list 5113-7060, pos. 410+420
weight: ca. 1,5 kg/pc
(Model: AS80-4) |
Brand | Code - Description |
RTK Vietnam | Replaced by: Motor control valve - Series MV 5311
in straightway form
DN 65, nominal pressure PN 25
Housing material Ductile iron EN-GJS-400-18-LT
Flanges with sealing surface DIN
Stem seal:
Roof rings PTFE / graphite
Characteristics / inflow. Equal percentage / on the cone
Hole plug, metal seat
Kvs value = 30 m³ / h, 30 mm stroke
Seat diameter 50 mm
Surface treatment with zinc-rich primer
CE marking according to the Pressure Equip-
ment Directive (PED)
max. allowable pressure according to DIN EN 1092
max. allowable temperature TS 250 ° C
Electric Actuator - Type ST 5113-35
Force of 6.0 kN, including manual adjustment
Phase 230 V, 50/60 Hz
Control speed mm 0.44 / s, stroke 30 mm
IP 65 protection
- Additional limit switches (2 pieces)
(- Model: ST 5113-35
Type: MKGBG0C00F000HF
WE-Nr. 24309101
230V 50/60Hz
0.44mm/s
6 KN, IP 55
Motor: 1500/1900 U/min 1.0
46VA
- RTK motor valve
Type: MV5311 CPL.DN65 PN25
W. N. 243091
DN 65, PN 25, Kvs 30, Hub 30
0-30 |
RTK Vietnam | Electric Actuator - Type ST 5113-35
Force of 6.0 kN, including manual adjustment
Phase 230 V, 50/60 Hz
Control speed mm 0.44 / s, stroke 30 mm
IP 65 protection
Column length 238 mm
Additional limit switches (2 pieces) |
RTK Vietnam | Replaced by: Motor control valve - Series MV 5311
in straightway form
DN 65, nominal pressure PN 25
Housing material Ductile iron EN-GJS-400-18-LT
Flanges with sealing surface DIN
Stem seal:
Roof rings PTFE / graphite
Characteristics / inflow. Equal percentage / on the cone
Hole plug, metal seat
Kvs value = 30 m³ / h, 30 mm stroke
Seat diameter 50 mm
Surface treatment with zinc-rich primer
CE marking according to the Pressure Equip-
ment Directive (PED)
max. allowable pressure according to DIN EN
1092
max. allowable temperature TS 250 ° C
(Type: MV5311 CPL.DN65 PN25
W. N. 243091
DN 65, PN 25, Kvs 30, Hub 30
0-30) |
RTK Vietnam | Pneumatic Actuators
Code: ST 6135.B6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 280 cm²
spring range 0.8..3.0 bar / stroke 35 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.A6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 530 cm²
spring range 0.8..2.8 bar / stroke 40 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.C6-7G
air supply max. 6 barg
diaphragm area 530 cm²
spring range 0.7..3.0 bar / max. stroke 60 mm
safety position: spring to close |
RTK Vietnam | Replaced by: PV6211-K DN65 PN25 kvs13
ST6135.B6-6G SR6136 3/2 230V
Actuator without valve
(Code: ST 6135 B6 6G
Serial number: 8072021-100) |
RTK Vietnam | Extra cost for:
1x electro-pneumatic positioner SR6136 (Sipart PS2)
1x 3/2-way solenoid valve G1/4 230V 50Hz |
RTK Vietnam | Replaced by: PV6311-K DN65 PN40 kvs19
ST6160.A6-6G FS SR6136 3/2 230
Actuator without valve
(Code: ST 6160 A6 6G
Serial number: 8072021-080) |
RTK Vietnam | Extra cost for:
1x electro-pneumatic positioner SR6136 (Sipart PS2)
1x 3/2-way solenoid valve G1/4 230V 50Hz |
RTK Vietnam | Pneumatic Actuator - Type ST-7G 6160.C6
Actuator without valve
(Code: ST 6160 C6 7G
Serial number: 11072544/040) |
RTK Vietnam | Extra cost for:
1x 3/2-way solenoid valve G1 / 4 230V 50Hz
1x limit switch Siemens 3RG4011AF00 (NC po-sition CLOSE)
1x limit switch Siemens 3RG4011AG00 (NO position ON)
1x throttle for solenoid valve |
RTK Vietnam | Pneumatic Actuators
Code: ST 6135.B6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 280 cm²
spring range 0.8..3.0 bar / stroke 35 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.A6-6G
Single acting air supply max. 6 barg, required air supply pressure : 6 bar
diaphragm area 530 cm²
spring range 0.8..2.8 bar / stroke 40 mm
safety position: spring to close |
RTK Vietnam | Pneumatic Actuators
Code: ST 6160.C6-7G
air supply max. 6 barg
diaphragm area 530 cm²
spring range 0.7..3.0 bar / max. stroke 60 mm
safety position: spring to close |
Bình luận