Pn7003 | Pressure Sensors | Ifm Vietnam | Pitesco Vn

Liên hệ

D5 Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh


 

PITESCO Việt Nam - Công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng xu hướng công nghiệp hóa, hiện đại hóa


Vui lòng liên hệ với chúng tôi để được tư vấn và hỗ trợ giá tốt nhất.


Nguyễn Ngọc Nam
 

 [Senior Sales Eng.]
  =============


Cellphone: 01666.455.335 |  0914.23.7179

Email:        ngocnam.pitesco@gmail.com



Product characteristics
Electronic pressure monitor
M12 connector
Process connection: G ¼ I
Communication interface: IO-Link 1.1 (COM2 slave, 38.4 kBaud)
Function programmable
2 outputs
OUT1 = switching output
OUT2 = switching output or diagnostic output
4-digit alphanumeric display
Measuring range: 0...25 bar / 0...363 psi / 0...2.5 MPa

Application
ApplicationType of pressure: relative pressure
Liquids and gases
Pressure rating150 bar2175 psi15 MPa
Bursting pressure min.350 bar5075 psi35 MPa
Medium temperature [°C]-25...80

Electrical data
Electrical designDC PNP/NPN
Operating voltage [V]18...36 DC ¹)
Current consumption [mA]< 35
Insulation resistance [MΩ]> 100 (500 V DC)
Protection classIII
Reverse polarity protectionyes
Overvoltage protection [V]up to 40

Outputs
Output2 outputs
OUT1 = switching output
OUT2 = switching output or diagnostic output
Output function2 x normally open / closed programmable or 1 x normally open / closed programmable + 1 x normally closed (diagnostic function)
Current rating [mA]250
Voltage drop [V]< 2
Short-circuit protectionpulsed
Switching frequency [Hz]≤ 170

Measuring / setting range
Measuring range0...25 bar0...363 psi0...2.5 MPa
Setting range
Set point, SP0.2...25.0 bar4...362 psi0.02...2.50 MPa
Reset point, rP0.1...24.9 bar2...360 psi0.01...2.49 MPa
in steps of0.1 bar2 psi0.01 MPa
Factory settingSP1 = 6.3 bar; rP1 = 5.8 bar
SP2 = 18.8 bar; rP2 = 18.3 bar

Accuracy / deviations
Accuracy / deviations
(in % of the span)
Switch point accuracy< ± 0.5
Characteristics deviation *)< ± 0.25 (BFSL) / < ± 0.5 (LS)
Hysteresis< ± 0.25
Repeatability **)< ± 0.1
Long-term stability ***)< ± 0.05
Temperature coefficients (TEMPCO) in the temperature range -20...80° C (in % of the span per 10 K)
Greatest TEMPCO of the zero point0.2
Greatest TEMPCO of the span0.2

Reaction times
Power-on delay time [s]0.3
Delay time programmable dS, dr [s]0; 0.2...50
Integrated watchdogyes

Software / programming
Programming optionshysteresis / window function; N.O. / N.C; diagnostic function; output polarity; on delay, off delay; damping; display unit

Interfaces
IO-Link Device
Transfer typeCOM2 (38.4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9 CDV
IO-Link Device ID310 d / 00 01 36 h
Profilesno profile
SIO modeyes
Required master port typeA
Process data analogue1
Process data binary2
Min. process cycle time [ms]2.3

Environment
Ambient temperature [°C]-20...80 (UB < 32 V) / -20...60 (UB > 32 V)
Storage temperature [°C]-40...100
ProtectionIP 65

Tests / approvals
EMC


EN 61000-4-2 ESD: 4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated: 10 V/m
EN 61000-4-4 Burst: 2 kV
EN 61000-4-5 Surge: 0.5/1 kV
EN 61000-4-6 HF conducted: 10 V

Shock resistance

DIN IEC 68-2-27:50 g (11 ms)  

Vibration resistance

DIN IEC 68-2-6:20 g (10...2000 Hz)  

MTTF [Years]219

Mechanical data
Process connectionG ¼ I
Materials (wetted parts)stainless steel (303S22); ceramics; FPM (Viton)
Housing materialsstainless steel (304S15); stainless steel 316L / 1.4404; PC (Makrolon); PBT (Pocan); PEI; FPM (Viton); PTFE
Switching cycles min.100 million
Weight [kg]0.263

Displays / operating elements
Display


Display unit 3 x LED green
Switching status 2 x LED yellow
Function display 4-digit alphanumeric display
Measured values 4-digit alphanumeric display


Electrical connection
ConnectionM12 connector; gold-plated contacts

Wiring



Programming of the output function
----------OUT1----------
Hno = hysteresis / normally open
Hnc = hysteresis / normally closed
Fno = window function / normally
open
Fnc = window function / normally
closed
----------OUT2----------
Hno = hysteresis / normally open
Hnc = hysteresis / normally closed
Fno = window function / normally
open
Fnc = window function / normally
closed
dESI = diagnostic function (normally
closed)



Bình luận

HẾT HẠN

0166 645 5335
Mã số : 8108528
Địa điểm : Hồ Chí Minh
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 02/08/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn