Gxmms.0505P32 – Absolute Encoders – Modular Bus Covers – Bộ Mã Hóa Vòng Quay Tuy

Mô tả 

Features
– Encoder singleturn / bus cover
– Optical sensing method
– Resolution: 13 bit
– Blind hollow shaft ø12…15 mm
– Extreme compact design
– CANopen®/DeviceNet/EtherCAT/EtherNet-IP
SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
– Code continuity check optional by bus
– Maximum resistant against magnetic fields

Optional

Technical data – electrical ratings
Voltage supply 5 VDC ±10 %
4.75…30 VDC
10…30 VDC
Reverse polarity protection Yes (4.75…30 VDC)
Consumption w/o load ≤30 mA (24 VDC) , ≤60 mA (5 VDC)
Pulses per revolution 5…6000
Reference signal Zero pulse, width 90°
Sensing method Optical
Output frequency ≤150 kHz
Output signals A 90° B, N + inverted
Output stages Linedriver/RS422
Push-pull short-circuit proof
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-4
Approval UL approval / E63076
GI355, GI356Technical data – electrical ratings
Voltage supply 10…30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤100 mA (24 VDC)
Initializing time typ. 250 ms after power on
Interfaces CANopen®, DeviceNet,
EtherCAT, EtherNet/IP, Profibus,
PROFINET, POWERLINK,
SAE J1939, SSI
Function Singleturn
Device adress Rotary switch in bus cover
(type-specific)
Steps per revolution ≤8192 / 13 bit
Absolute accuracy ±0.025 °
Sensing method Optical
Code Binary
Code sequence CW/CCW programmable
Incremental output 2048 pulses A90°B (optional)
Interference immunity DIN EN 61000-6-2
Emitted interference DIN EN 61000-6-4
Programmable
parameters
Steps per revolution
Preset
Scaling
Rotating direction
Diagnostic function Position or parameter error
Status indicator DUO-LED integrated in bus
cover
Approval UL approval / E63076

Technical data – mechanical design

Technical data – mechanical design
Size (flange) ø58 mm
Shaft type ø12…15 mm (blind hollow shaft)
Protection DIN EN 60529 IP 54, IP 65
Operating speed ≤6000 rpm (mechanical)
≤6000 rpm (electric)
Starting acceleration ≤1000 U/s²
Starting torque ≤0.015 Nm (+25 °C, IP 54)
≤0.03 Nm (+25 °C, IP 65)
Rotor moment of inertia 20 gcm²
Materials Housing: steel
Flange: aluminium
Bus cover: zinc die-cast
Operating temperature -25…+85 °C
-40…+85 °C (optional)
Relative humidity 95 % non-condensing
Resistance DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
Weight approx. 500 g
Connection Bus cover